Hanan Abdali, Bentolhoda Heli, Abdellah Ajji

Sensors • 2019

A nanocomposite of cross-linked bacterial cellulose-amino graphene/polyaniline (CLBC-AmG/PANI) was synthesized by covalent interaction of amino-functionalized graphene (AmG) AmG and bacterial cellulose (BC) via one step esterification, and then the aniline monomer was grown on the surface of CLBC-AmG through in situ chemical polymerization. The morphological structure and properties of the samples were characterized by using scanning electron microscopy (SEM), and thermal gravimetric analyzer (TGA). The CLBC-AmG/PANI showed good electrical-resistance response toward carbon dioxide (CO 2 ) at room temperature, compared to the BC/PANI nanopaper composites. The CLBC-AmG/PANI sensor possesses high sensitivity and fast response characteristics over CO 2 concentrations ranging from 50 to 2000 ppm. This process presents an extremely suitable candidate for developing novel nanomaterials sensors owing to easy fabrication and efficient sensing performance.

Andy Shar, Angela Shar, Daeha Joung

Frontiers in Bioengineering and Biotechnology • 2023

Carbon nanotube (CNT) nanocomposite scaffolds have emerged as highly promising frameworks for tissue engineering research. By leveraging their intrinsic electrical conductivity and valuable mechanical properties, CNTs are commonly dispersed into polymers to create robust, electrically conductive scaffolds that facilitate tissue regeneration and remodeling. This article explores the latest progress and challenges related to CNT dispersion, functionalization, and scaffold printing techniques, including electrospinning and 3D printing. Notably, these CNT scaffolds have demonstrated remarkable positive effects across various cell culture systems, stimulating neuronal growth, promoting cardiomyocyte maturation, and facilitating osteocyte differentiation. These encouraging results have sparked significant interest within the regenerative medicine field, including neural, cardiac, muscle, and bone regenerations. However, addressing the concern of CNT cytotoxicity in these scaffolds remains critical. Consequently, substantial efforts are focused on exploring strategies to minimize cytotoxicity associated with CNT-based scaffolds. Moreover, researchers have also explored the intriguing possibility of utilizing the natural cytotoxic properties of CNTs to selectively target cancer cells, opening up promising avenues for cancer therapy. More research should be conducted on cutting-edge applications of CNT-based scaffolds through phototherapy and electrothermal ablation. Unlike drug delivery systems, these novel methodologies can combine 3D additive manufacturing with the innate physical properties of CNT in response to electromagnetic stimuli to efficiently target localized tumors. Taken together, the unique properties of CNT-based nanocomposite scaffolds position them as promising candidates for revolutionary breakthroughs in both regenerative medicine and cancer treatment. Continued research and innovation in this area hold significant promise for improving healthcare outcomes.

Amar Kamal Mohamedkhair, Q.A. Drmosh, Zain H. Yamani

Frontiers in Materials • 2019

In this work, sputtered tin oxide films, decorated with silver nanoparticles were fabricated as hydrogen sensors. The fabricated thin films were characterized for their structural, compositional, morphological properties using various characterization techniques including X-ray photoelectron spectroscopy, UV-Vis absorption, X-Ray diffraction, field emission scanning electron microscope, and atomic force microscopy. The morphological characterization confirmed the formation of nanoparticles decorated SnO2 thin films. X-ray photoelectron spectroscopy spectroscopic analysis established the presence of silver/silver oxide on SnO2 thin films. The gas sensing properties of the fabricated sensors were investigated at different concentrations of hydrogen gas, over an operating temperature range of room temperature to 500 °C. It was found that the prepared sensor can detect a low hydrogen concentration (50 ppm) at high operation temperature, while the higher concentration (starting from 600 ppm) can be detected even at room temperature. Furthermore, on the basis of the electronic interaction between the SnO2 and the Ag nanoparticles, we propose a reaction model to explain the qualitative findings of the study.

Jin-Ho Son, Hongseok Kim, Yoonseob Choi et al.

Microsystems & Nanoengineering • 2024

The energy devices for generation, conversion, and storage of electricity are widely used across diverse aspects of human life and various industry. Three-dimensional (3D) printing has emerged as a promising technology for the fabrication of energy devices due to its unique capability of manufacturing complex shapes across different length scales. 3D-printed energy devices can have intricate 3D structures for significant performance enhancement, which are otherwise impossible to achieve through conventional manufacturing methods. Furthermore, recent progress has witnessed that 3D-printed energy devices with micro-lattice structures surpass their bulk counterparts in terms of mechanical properties as well as electrical performances. While existing literature focuses mostly on specific aspects of individual printed energy devices, a brief overview collectively covering the wide landscape of energy applications is lacking. This review provides a concise summary of recent advancements of 3D-printed energy devices. We classify these devices into three functional categories; generation, conversion, and storage of energy, offering insight on the recent progress within each category. Furthermore, current challenges and future prospects associated with 3D-printed energy devices are discussed, emphasizing their potential to advance sustainable energy solutions.

Hongchuan Jiang, Yibing Yu, Luying Zhang et al.

Sensors • 2019

A highly sensitive and flexible hydrogen sensor based on organic nanofibers decorated by Pd nanoparticles (NPs) was designed and fabricated for low-concentration hydrogen detection. Pd NPs were deposited on organic nanofiber materials by DC magnetron sputtering. The temperature dependence of the sensitivity at 25 ppm H₂ was characterized and discussed, and the maximum response of the sensor increased linearly with increasing measurement temperature. Performances of the hydrogen sensor were investigated with hydrogen concentration ranging from 5 ppm to 50 ppm. This sensor exhibits high sensitivity, with the response up to 6.55% for H₂ as low as 5 ppm, and the output response of the hydrogen sensor increased linearly with the square root of hydrogen concentration. A cycling test between pure nitrogen and 25 ppm hydrogen concentration was performed, and the hydrogen sensor exhibited excellent consistency.

Sanna Siljander, Pasi Keinänen, Anna Räty et al.

International Journal of Molecular Sciences • 2018

We present a detailed study on the influence of sonication energy and surfactant type on the electrical conductivity of nanocellulose-carbon nanotube (NFC-CNT) nanocomposite films. The study was made using a minimum amount of processing steps, chemicals and materials, to optimize the conductivity properties of free-standing flexible nanocomposite films. In general, the NFC-CNT film preparation process is sensitive concerning the dispersing phase of CNTs into a solution with NFC. In our study, we used sonication to carry out the dispersing phase of processing in the presence of surfactant. In the final phase, the films were prepared from the dispersion using centrifugal cast molding. The solid films were analyzed regarding their electrical conductivity using a four-probe measuring technique. We also characterized how conductivity properties were enhanced when surfactant was removed from nanocomposite films; to our knowledge this has not been reported previously. The results of our study indicated that the optimization of the surfactant type clearly affected the formation of freestanding films. The effect of sonication energy was significant in terms of conductivity. Using a relatively low 16 wt. % concentration of multiwall carbon nanotubes we achieved the highest conductivity value of 8.4 S/cm for nanocellulose-CNT films ever published in the current literature. This was achieved by optimizing the surfactant type and sonication energy per dry mass. Additionally, to further increase the conductivity, we defined a preparation step to remove the used surfactant from the final nanocomposite structure.

Bárbara Socas‐Rodríguez, Antonio V. Herrera‐Herrera, María Asensio‐Ramos et al.

Processes • 2020

Nanotechnology has become a topic of interest due to the outstanding advantages that the use of nanomaterials offers in many fields. Among them, magnetic nanoparticles (m-NPs) have been one of the most widely applied in recent years. In addition to the unique features of nanomaterials in general, which exclusively appear at nanoscale, these present magnetic or paramagnetic properties that result of great interest in many applications. In particular, in the area of food analysis, the use of these nanomaterials has undergone a considerable increase since they can be easily separated from the matrix in sorbent-based extractions, providing a considerable simplification of the procedures. This allows reducing cost and giving fast responses, which is essential in the food trade to guarantee consumer safety. These materials can also be easily tunable, providing higher selectivity. Moreover, their particular electrical, thermal and optical characteristics allow enhancing sensor signals, increasing the sensitivity of the approaches based on this type of device. The aim of this review article is to summarise the most remarkable applications of m-NPs in food analysis in the last five years (2016–2020) showing a general view of the use of such materials in the field.

Xiyi Li, Chao Wang, Jianlong Yang et al.

Nature Communications • 2023

Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.3 nm) was decorated on TiO 2 , which works for the efficient, stable, and selective photocatalytic oxidative coupling of methane at room temperature. A high methane conversion rate of 2480 μmol g -1 h -1 to C 2 with an apparent quantum efficiency of ~8.4% has been achieved. More importantly, the photocatalyst exhibits the turnover frequency and turnover number of 116 h -1 and 12,642 with respect to PdCu, representing a record among all the photocatalytic processes (λ > 300 nm) operated at room temperature, together with a long stability of over 112 hours. The nanoalloy works as a hole acceptor, in which Pd softens and weakens C-H bond in methane and Cu decreases the adsorption energy of C 2 products, leading to the high efficiency and long-time stability.

Sheng-Kai Tong, Po‐Wei Chi, Shu-Hsiang Kung et al.

Scientific Reports • 2018

Stress variation induced bandgap tuning and surface wettability switching of spinel nickel ferrite (NiFe 2 O 4 , NFO) films were demonstrated and directly driven by phase transition via a post-annealing process. Firstly, the as-deposited NFO films showed hydrophilic surface with water contact angle (CA) value of 80 ± 1°. After post-annealing with designed temperatures ranged from 400 to 700 °C in air ambience for 1 hour, we observed that the crystal structure was clearly improved from amorphous-like/ nanocrystalline to polycrystalline with increasing post-annealing temperature and this phenomenon is attributed to the improved crystallinity combined with relaxation of internal stress. Moreover, super-hydrophilic surface (CA = 14 ± 1°) was occurred due to the remarkable grain structure transition. The surface wettability could be adjusted from hydrophilicity to super-hydrophilicity by controlling grain morphology of NFO films. Simultaneously, the saturation magnetization (M s ) values of NFO films at room temperature increased up to 273 emu/cm 3 accompanied with transitions of the phase and grain structure. We also observed an exceptionally tunable bandgap of NFO in the range between 1.78 and 2.72 eV under phase transition driving. Meanwhile, our work demonstrates that direct grain morphology combined with the stress tuning can strongly modulate the optical, surface and magnetic characteristics in multifunctional NFO films.

Aya Osama Mousa, Mohamed Gamal Mohamed, Cheng‐Hsin Chuang et al.

Polymers • 2023

Porous organic polymers (POPs) have plenteous exciting features due to their attractive combination of microporosity with π-conjugation. Nevertheless, electrodes based on their pristine forms suffer from severe poverty of electrical conductivity, precluding their employment within electrochemical appliances. The electrical conductivity of POPs may be significantly improved and their porosity properties could be further customized by direct carbonization. In this study, we successfully prepared a microporous carbon material (Py-PDT POP-600) by the carbonization of Py-PDT POP, which was designed using a condensation reaction between 6,6'-(1,4-phenylene)bis(1,3,5-triazine-2,4-diamine) (PDA-4NH 2 ) and 4,4',4'',4'''-(pyrene-1,3,6,8-tetrayl)tetrabenzaldehyde (Py-Ph-4CHO) in the presence of dimethyl sulfoxide (DMSO) as a solvent. The obtained Py-PDT POP-600 with a high nitrogen content had a high surface area (up to 314 m 2 g -1 ), high pore volume, and good thermal stability based on N 2 adsorption/desorption data and a thermogravimetric analysis (TGA). Owing to the good surface area, the as-prepared Py-PDT POP-600 showed excellent performance in CO 2 uptake (2.7 mmol g -1 at 298 K) and a high specific capacitance of 550 F g -1 at 0.5 A g -1 compared with the pristine Py-PDT POP (0.24 mmol g -1 and 28 F g -1 ).

Chandra Shekhar Prajapati, Navakanta Bhat

RSC Advances • 2018

In this study, we have investigated the thickness-dependent nitrogen dioxide (NO 2 ) sensing characteristics of a reactive-ion magnetron sputtered tungsten trioxide (WO 3 ) film, followed by morphological and electrical characterizations. Subsequently, the sensing material was integrated with an MEMS platform to develop a sensor chip to integrate with electronics for portable applications. Sputtered films are studied for their sensing performance under different operating conditions to discover the optimum thickness of the film for integrating it with a CMOS platform. The optimized film thickness of ∼85 nm shows the 16 ppb lower limit of detection and 39 ppb detection precision at the optimum 150 °C operating temperature. The film exhibits an extremely high sensor response [( R g - R a )/ R a × 100 = 26%] to a low (16 ppb) NO 2 concentration, which is a comparatively high response reported to date among reactively sputtered films. Moreover, this optimum film has a longer recovery time than others. Thus, an intentional temperature overshoot is made part of the sensing protocol to desorb the NO 2 species from the film surface, resulting in full recovery to the baseline without affecting the sensing material properties. Finally, the optimized film was successfully integrated on the sensor platform, which had a chip size of 1 mm 2 , with an inbuilt micro-heater. The minimum power consumption of the microheater is ∼6.6 mW (∼150 °C), which is practically acceptable. Later, the sensor device was packaged on a Kovar heater for the detailed electrical and sensing characterizations. This study suggests that optimization of the sensing material and optimum operating temperature help to develop a highly sensitive, selective, stable, and portable gas sensor for indoor or outdoor applications.

Binjie Chen, Zhengyang Feng, Fang‐Zhou Yao et al.

npj Flexible Electronics • 2025

Abstract Piezoelectric materials are capable of converting between mechanical and electrical energy, and are suitable for sensing, actuating and energy harvesting. While most conventional piezoelectric materials are brittle solids, flexible piezoelectric materials (FPM) retain functionality even under bending and stretching conditions. This characteristic has garnered increasing attention in recent years, particularly for wearable devices, where the ability to adapt to dynamic human movements is essential. In addition, wearable devices also demand excellent conformability, durability, and adaptability to miniaturization. FPM emerge as a promising solution that meet all these requirements. This review thus aims to offer a comprehensive summary of recent advances in the field of FPM, including piezoelectric polymers, composites, and inorganic flexible films. We introduce and categorize the specific features of these materials and highlight their emerging applications in electronic devices, and comment on the prospect of FPM as well as their potential challenges.

Naresh Shahi, Eunji Lee, Byungjin Min et al.

Sensors • 2021

Cellulose and its derivatives have evoked much attention in sensor technology as host-matrices for conducting materials because of their versatility, renewability, and biocompatibility. However, only a few studies have dealt with the potential utilization of cellulose as a sensing material without a composite structure. In this study, cellulose nanofibers (CNF) and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNF) extracted from rice husks by using ultrasonic-assisted methods are introduced as a potential gas sensing material with highly sensitive performance. To fabricate nanocellulose-based films, CNF, TOCNF, and TOCNF with glycerol (TOCNF/G) were dispersed in water and applied on polyimide substrate with digital electrodes to form self-standing thin films by a drop-casting method. A transparent coating layer on the surface of the plate after drying is used for the detection of water-soluble gases such as acetone, ammonia, methane, and hydrogen sulfide gases at room temperature at 52% relative humidity. The sensor prototypes exhibited high sensitivity, and the detection limit was between 1 ppm and 5 ppm, with less than 10 min response and recovery time. The results indicate that both the CNF- and the TOCNF-coated sensors show good sensitivity toward ammonia and acetone, compared to other gases. A TOCNF/G-coated sensor exhibited minimum time in regard to response/recovery time, compared to a CNF-coated sensor. In this study, nanocellulose-based sensors were successfully fabricated using a low-cost process and a bio-based platform. They showed good sensitivity for the detection of various gases under ambient conditions. Therefore, our study results should further propel in-depth research regarding various applications of cellulose-based sensors in the future.

Adriana Rioja-Cabanillas, David Valdesueiro, Pilar Fernández‐Ibañez et al.

Journal of Physics Energy • 2020

Abstract In recent years, the intensification of human activities has led to an increase in waste production and energy demand. The treatment of pollutants contained in wastewater coupled to energy recovery is an attractive solution to simultaneously reduce environmental pollution and provide alternative energy sources. Hydrogen represents a clean energy carrier for the transition to a decarbonized society. Hydrogen can be generated by photosynthetic water splitting where oxygen and hydrogen are produced, and the process is driven by the light energy absorbed by the photocatalyst. Alternatively, hydrogen may be generated from hydrogenated pollutants in water through photocatalysis, and the overall reaction is thermodynamically more favourable than water splitting for hydrogen. This review is focused on recent developments in research surrounding photocatalytic and photoelectrochemical hydrogen production from pollutants that may be found in wastewater. The fundamentals of photocatalysis and photoelectrochemical cells are discussed, along with materials, and efficiency determination. Then the review focuses on hydrogen production linked to the oxidation of compounds found in wastewater. Some research has investigated hydrogen production from wastewater mixtures such as olive mill wastewater, juice production wastewater and waste activated sludge. This is an exciting area for research in photocatalysis and semiconductor photoelectrochemistry with real potential for scale up in niche applications.

Mahnaz Shafiei, Faegheh Hoshyargar, Nunzio Motta et al.

Materials & Design • 2017

Ariadne H. P. de Oliveira, Márcio Luis Ferreira Nascimento, Helinando Pequeno de Oliveira

Materials Research • 2016

Core/shell structures of carbon-based materials/ metal oxide have been considered as potential candidates for electrochemical devices due to their improved pseudocapacitance/electrical double layer capacitance and high conductivity/ superior surface area. The development of multiple core-shell structures of MWCNT@MnO2@PPy was analyzed as a standard procedure for mass production of supercapacitor electrodes. The relative concentration of carbon nanotubes in the composite was varied to optimize the double layer capacitance contribution in overall response of device. Resulting structures presented capacitance in order of 272.7 Fg-1 and reasonable cycling performance.

Pariksha Bishnoi, Samarjeet Singh Siwal, Vinod Kumar et al.

Electron • 2024

Abstract There has been a significant scope toward the cutting‐edge investigations in hierarchical carbon nanostructured electrodes originating from cellulosic materials, such as cellulose nanofibers, available from natural cellulose and bacterial cellulose. Elements of energy storage systems (ESSs) are typically established upon inorganic/metal mixtures, carbonaceous implications, and petroleum‐derived hydrocarbon chemicals. However, these conventional substances may need help fulfilling the ever‐increasing needs of ESSs. Nanocellulose has grown significantly as an impressive 1D element due to its natural availability, eco‐friendliness, recyclability, structural identity, simple transformation, and dimensional durability. Here, in this review article, we have discussed the role and overview of cellulose‐based hydrogels in ESSs. Additionally, the extraction sources and solvents used for dissolution have been discussed in detail. Finally, the properties (such as self‐healing, transparency, strength and swelling behavior), and applications (such as flexible batteries, fuel cells, solar cells, flexible supercapacitors and carbon‐based derived from cellulose) in energy storage devices and conclusion with existing challenges have been updated with recent findings.

Junbeom Park, Ramesh Ghosh, Minho Song et al.

NPG Asia Materials • 2022

Abstract We report the fabrication of individually addressable, high-density, vertical zinc oxide (ZnO) nanotube pressure sensor arrays. High-sensitivity and flexible piezoelectric sensors were fabricated using dimension- and position-controlled, vertical, and free-standing ZnO nanotubes on a graphene substrate. Significant pressure/force responses were achieved from small devices composed of only single, 3 × 3, 5 × 5, and 250 × 250 ZnO nanotube arrays on graphene. An individually addressable pixel matrix was fabricated by arranging the top and bottom electrodes of the sensors in a crossbar configuration. We investigated the uniformity and robustness of pressure/force spatial mapping by considering the pixel size, the number of ZnO nanotubes in each pixel, and the lateral dimensions of individual ZnO nanotubes. A spatial resolution as high as 1058 dpi was achieved for a Schottky diode-based force/pressure sensor composed of ZnO nanotubes on a flexible substrate. Additionally, we confirmed the excellent flexibility and electrical robustness of the free-standing sensor arrays for high-resolution tactile imaging. We believe that this work opens important opportunities for 1D piezoelectric pressure/force sensor arrays with enormous applications in human-electronics interfaces, smart skin, and micro- and nanoelectromechanical systems.

Wei Yin Lim, Choon‐Hian Goh, Keenan Zhihong Yap et al.

Biosensors • 2023

Irregularities in breathing patterns can be detected using breath monitor sensors, and this help clinicians to predict health disorders ranging from sleep disorders to heart failures. Variations in humidity during the inhalation and exhalation of breath have been utilized as a marker to detect breath patterns, and graphene-based devices are the favored sensing media for relative humidity (RH). In general, most graphene-based RH sensors have been used to explore resistance change as a measurement parameter to calibrate against the RH value, and they are prone to noise interference. Here, we fabricated RH sensors using graphene ink as a sensing medium and printed them in the shape of interdigital electrodes on glossy paper using an office inkjet printer. Further, we investigated the capacitance change in the sensor for the RH changes in the range of 10-70%. It exhibited excellent sensitivity with 0.03 pF/% RH, good stability, and high intraday and interday repeatability, with relative standard deviations of 1.2% and 2.2%, respectively. Finally, the sensor was embedded into a face mask and interfaced with a microcontroller, and capacitance change was measured under three different breathing situations: normal breathing, deep breathing, and coughing. The result show that the dominant frequency for normal breath is 0.22 Hz, for deep breath, it is 0.11 Hz, and there was no significant dominant cough frequency due to persistent coughing and inconsistent patterns. Moreover, the sensor exhibited a short response and recovery time (<5 s) during inhalation and exhalation. Thus, the proposed paper-based RH sensor is promising wearable and disposable healthcare technology for clinical and home care health applications.

Zikai Jiang, Weigen Chen, Lingfeng Jin et al.

Nanomaterials • 2018

The development of functionalized metal oxide/reduced graphene oxide (rGO) hybrid nanocomposites concerning power equipment failure diagnosis is one of the most recent topics. In this work, WO₃ nanolamellae/reduced graphene oxide (rGO) nanocomposites with different contents of GO (0.5 wt %, 1 wt %, 2 wt %, 4 wt %) were synthesized via controlled hydrothermal method. X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analyses-derivative thermogravimetric analysis-differential scanning calorimetry (TG-DTG-DSC), BET, and photoluminescence (PL) spectroscopy were utilized to investigate morphological characterizations of prepared gas sensing materials and indicated that high quality WO₃ nanolamellae were widely distributed among graphene sheets. Experimental ceramic planar gas sensors composing of interdigitated alumina substrates, Au electrodes, and RuO₂ heating layer were coated with WO₃ nanolamellae/reduced graphene oxide (rGO) films by spin-coating technique and then tested for gas sensing towards multi-concentrations of acetylene (C₂H₂) gases in a carrier gas with operating temperature ranging from 50 °C to 400 °C. Among four contents of prepared samples, sensing materials with 1 wt % GO nanocomposite exhibited the best C₂H₂ sensing performance with lower optimal working temperature (150 °C), higher sensor response (15.0 toward 50 ppm), faster response-recovery time (52 s and 27 s), lower detection limitation (1.3 ppm), long-term stability, and excellent repeatability. The gas sensing mechanism for enhanced sensing performance of nanocomposite is possibly attributed to the formation of p-n heterojunction and the active interaction between WO₃ nanolamellae and rGO sheets. Besides, the introduction of rGO nanosheets leads to the impurity of synthesized materials, which creates more defects and promotes larger specific area for gas adsorption, outstanding conductivity, and faster carrier transport. The superior gas sensing properties of WO₃/rGO based gas sensor may contribute to the development of a high-performance ppm-level gas sensor for the online monitoring of dissolved C₂H₂ gas in large-scale transformer oil.

Shih-Hang Chang, Boyen Huang, Ting-Hao Wan et al.

RSC Advances • 2017

Surface modification of a carbon cloth anode by screen-printing rGO and APPJ is promising for manufacturing large-scale MFC stacks.

Yong Yang, Zhou Chen, Junxiong Zhang et al.

International Journal of Polymer Science • 2019

Cellulose widely existed in plants and bacteria, which takes important effect on the synthesis of macromolecule polymer material. Because of its great material properties, the cellulose nanocrystal (CNC) showed its necessary prospect in various industrial applications. As a renewable future material, the preparation methods of the CNC were reviewed in this paper. Meanwhile, the important applications of CNC in the field of composites, barrier film, electronics, and energy consumption were also mentioned with brief introductions. The summarized preparations and considerable applications provided operable ideas and methods for the future high-end and eco-friendly functional composites. Suggestions for potential applications were also discussed.

Qawareer Fatima, Azhar Ali Haidry, Zhengjun Yao et al.

Nanoscale Advances • 2018

Excellent adsorption of water vapor on the surface of graphene oxide (GO), which contains several inherited functional groups, leads to the development of improved humidity monitoring systems that can urgently meet the high industrial demand. In this study, we fabricated a GO-based humidity sensor and investigated the influence of hydroxyl group concentration on its performance. The sensor exhibited excellent humidity sensing performance in terms of sensitivity (sensor response ∼40 for 90% RH), selectivity, stability (both long-term and short-term) and reaction time ( τ res = 8.5 s and τ rec = 13 s). Additionally, this sensor does not require external power consumption for heating; thus, the aforementioned performance (recorded at room temperature) with an applied voltage of 0.1 V can significantly reduce the power/energy consumption to about ∼1.314 × 10 -4 kW h per year. In the future, this type of sensor can be integrated into smart humidity monitoring systems to not only monitor but also control the humidity levels on a specific application area. Based on complementary characterization techniques, such as XRD, AFM, Raman and electrical measurement, here, we propose a physical-chemical sensing model to elucidate the aforementioned sensor characteristics.

Shaolin Zhang, Nguyen T Hang, Zhijun Zhang et al.

Nanomaterials • 2017

Graphitic carbon nitride (g-C₃N₄) nanosheets were exfoliated from bulk g-C₃N₄ and utilized to improve the sensing performance of a pure graphene sensor for the first time. The role of hydrochloric acid treatment on the exfoliation result was carefully examined. The exfoliated products were characterized by X-ray diffraction (XRD) patterns, scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV-Vis spectroscopy. The exfoliated g-C₃N₄ nanosheets exhibited a uniform thickness of about 3-5 nm and a lateral size of about 1-2 µm. A g-C₃N₄/graphene nanocomposite was prepared via a self-assembly process and was demonstrated to be a promising sensing material for detecting nitrogen dioxide gas at room temperature. The nanocomposite sensor exhibited better recovery as well as two-times the response compared to pure graphene sensor. The detailed sensing mechanism was then proposed.

Meisam Ashrafivala, Seyed Borhan Mousavi, Saeed Zeinali Heris et al.

International Journal of Hydrogen Energy • 2022

José Alberto, Cristina Leal, Cláudio Roberto Alves Fernandes et al.

Scientific Reports • 2020

Bioelectronics stickers that interface the human epidermis and collect electrophysiological data will constitute important tools in the future of healthcare. Rapid progress is enabled by novel fabrication methods for adhesive electronics patches that are soft, stretchable and conform to the human skin. Yet, the ultimate functionality of such systems still depends on rigid components such as silicon chips and the largest rigid component on these systems is usually the battery. In this work, we demonstrate a quickly deployable, untethered, battery-free, ultrathin (~5 μm) passive "electronic tattoo" that interfaces with the human skin for acquisition and transmission of physiological data. We show that the ultrathin film adapts well with the human skin, and allows an excellent signal to noise ratio, better than the gold-standard Ag/AgCl electrodes. To supply the required energy, we rely on a wireless power transfer (WPT) system, using a printed stretchable Ag-In-Ga coil, as well as printed biopotential acquisition electrodes. The tag is interfaced with data acquisition and communication electronics. This constitutes a "data-by-request" system. By approaching the scanning device to the applied tattoo, the patient's electrophysiological data is read and stored to the caregiver device. The WPT device can provide more than 300 mW of measured power if it is transferred over the skin or 100 mW if it is implanted under the skin. As a case study, we transferred this temporary tattoo to the human skin and interfaced it with an electrocardiogram (ECG) device, which could send the volunteer's heartbeat rate in real-time via Bluetooth.

Valeria Gabrielli, Marco Frasconi

Chemosensors • 2022

The growing bioeconomic demand for lightweight materials with combined sustainability, large-scale production, ease in functionalization and competitive mechanical properties has seen the revival of cellulose as a scaffold for several applications. In particular, due to its multifunctional features, cellulose has found application in sensor and biosensor fabrication. Nonetheless, the great variety of cellulose properties and formulations makes the choice of the best suited cellulose-based material for a specific sensing strategy a difficult task. This review offers a critical discussion and guide for the reader towards the understanding of which of the multiple cellulose derivatives and properties can be exploited for the optimal performance of the desired sensing device. We introduce the unique molecular structure, nanoarchitecture and main properties of cellulose and its derivatives. The different functionalization approaches for anchoring receptors on cellulose derivatives and the processing methodologies for fabricating cellulose-based sensors are explored. As far as the use and performance of cellulose-based functional materials in sensors is concerned, we discuss the recent advances of optical and electrochemical sensors and biosensors for biomedical and environmental monitoring.

Incheol Cho, Kichul Lee, Young Chul Sim et al.

Light Science & Applications • 2023

Electronic nose (e-nose) technology for selectively identifying a target gas through chemoresistive sensors has gained much attention for various applications, such as smart factory and personal health monitoring. To overcome the cross-reactivity problem of chemoresistive sensors to various gas species, herein, we propose a novel sensing strategy based on a single micro-LED (μLED)-embedded photoactivated (μLP) gas sensor, utilizing the time-variant illumination for identifying the species and concentrations of various target gases. A fast-changing pseudorandom voltage input is applied to the μLED to generate forced transient sensor responses. A deep neural network is employed to analyze the obtained complex transient signals for gas detection and concentration estimation. The proposed sensor system achieves high classification (~96.99%) and quantification (mean absolute percentage error ~ 31.99%) accuracies for various toxic gases (methanol, ethanol, acetone, and nitrogen dioxide) with a single gas sensor consuming 0.53 mW. The proposed method may significantly improve the efficiency of e-nose technology in terms of cost, space, and power consumption.

Farnaz Zadehahmadi, Nathan T. Eden, Hamidreza Mahdavi et al.

Environmental Science Water Research & Technology • 2023

This review article focuses on metal–organic framework (MOF) composites and the impact of mixing MOFs with other materials, such as polymers, carbon-based materials, and magnetic particles, to increase their performance to remove metals from water.

Luis Miguel Anaya‐Esparza, Zuamí Villagrán, José Martín Ruvalcaba-Gómez et al.

Processes • 2020

In recent years, a strong interest has emerged in polysaccharide-hybrid composites and their potential applications, which have interesting functional and technological properties. This review summarizes and discusses the reported advantages and limitations of the functionalization of conventional and nonconventional polysaccharides by adding TiO2 nanoparticles as a reinforcement agent. Their effects on the mechanical, thermal, and UV-barrier properties as well as their water-resistance are discussed. In general, the polysaccharide–TiO2 hybrid materials showed improved physicochemical properties in a TiO2 content-dependent response. It showed antimicrobial activity against bacteria (gram-negative and gram-positive), yeasts, and molds with enhanced UV-protective effects for food and non-food packaging purposes. The reported applications of functionalized polysaccharide–TiO2 composites include photocatalysts (dye removal from aqueous media and water purification), biomedical (wound-healing material, drug delivery systems, biosensor, and tissue engineering), food preservation (fruits and meat), cosmetics (sunscreen and bleaching tooth treatment), textile (cotton fabric self-cleaning), and dye-sensitized solar cells. Furthermore, the polysaccharide–TiO2 showed high biocompatibility without adverse effects on different cell lines, indicating that their use in food, pharmaceutical, and biomedical applications is safe. However, it is necessary to evaluate the structural changes promoted by the storage conditions (time and temperature) on the physicochemical properties of polysaccharide–TiO2 hybrid composites to guarantee their stability during a determined time.

Kevin M. Wyss, Robert De Kleine, Rachel Couvreur et al.

Communications Engineering • 2022

Abstract Responsible disposal of vehicles at the end of life is a pressing environmental concern. In particular, waste plastic forms the largest proportion of non-recycled waste material from light-duty vehicles, and often ends up in a landfill. Here we report the upcycling of depolluted, dismantled and shredded end-of-life waste plastic into flash graphene using flash Joule heating. The synthetic process requires no separation or sorting of plastics and uses no solvents or water. We demonstrate the practical value of the graphene as a re-inforcing agent in automotive polyurethane foam composite, where its introduction leads to improved tensile strength and low frequency noise absorption properties. We demonstrate process continuity by upcycling the resulting foam composite back into equal-quality flash graphene. A prospective cradle-to-gate life cycle assessment suggests that our method may afford lower cumulative energy demand and water use, and a decrease in global warming potential compared to traditional graphene synthesis methods.

Renny Edwin Fernandez, Yogeswaran Umasankar, Pandiaraj Manickam et al.

Scientific Reports • 2017

We report a disposable point-of-care sensing platform specific to salivary cortisol detection. The sensor is inkjet printed on a paper substrate with a metalloporphyrin based macrocyclic catalyst ink that can electrochemically reduce cortisol, captured by aptamer functionalized magnetic nanoparticles. The sensor consists of a thin magnet disc, aligned at the back of the electrode, in order to populate the magnetic nanoparticle bound cortisol at the sensing electrode area. Proof of concept studies were performed to detect salivary cortisol levels in human subjects with high and low risks for obstructive sleep apnea (OSA). High selectivity was observed to salivary cortisol against a background of closely related steroids.

Gwan‐Jin Ko, Soo Deok Han, Jeong-Ki Kim et al.

NPG Asia Materials • 2020

Abstract A novel transient electronics technology that is capable of completely dissolving or decomposing in certain conditions after a period of operation offers unprecedented opportunities for medical implants, environmental sensors, and other applications. Here, we describe a biodegradable, flexible silicon-based electronic system that detects NO species with a record-breaking sensitivity of 136 Rs (5 ppm, NO 2 ) and 100-fold selectivity for NO species over other substances with a fast response (~30 s) and recovery (~60 s). The exceptional features primarily depend on not only materials, dimensions, and design layouts but also temperatures and electrical operations. Large-scale sensor arrays in a mechanically pliable configuration exhibit negligible deterioration in performance under various modes of applied loads, consistent with mechanics modeling. In vitro evaluations demonstrate the capability and stability of integrated NO x devices in severe wet environments for biomedical applications.

Segundo Rojas-Flores, Santiago M. Benites, Magaly De La Cruz-Noriega et al.

Processes • 2021

Global warming and the increase in organic waste from agro-industries create a major problem for the environment. In this sense, microbial fuel cells (MFC) have great potential for the generation of bioelectricity by using organic waste as fuel. This research produced low-cost MFC by using zinc and copper electrodes and taking blueberry waste as fuel. A peak current and voltage of 1.130 ± 0.018 mA and 1.127 ± 0.096 V, respectively, were generated. The pH levels were acid, with peak conductivity values of 233. 94 ± 0.345 mS/cm and the degrees Brix were descending from the first day. The maximum power density was 3.155 ± 0.24 W/cm2 at 374.4 mA/cm2 current density, and Cándida boidinii was identified by means of molecular biology and bioinformatics techniques. This research gives a new way to generate electricity with this type of waste, generating added value for the companies in this area and helping to reduce global warming.

Zakariyya Uba Zango, Nonni Soraya Sambudi, Khairulazhar Jumbri et al.

Water • 2020

Polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds had been widely recognized as priority organic pollutants in wastewater with toxic effects on both plants and animals. Thus, the remediation of these pollutants has been an active area of research in the field of environmental science and engineering. This review highlighted the advantage of adsorption technology in the removal of PAHs and phenols in wastewater. The literature presented on the applications of various porous carbon materials such as biochar, activated carbon (AC), carbon nanotubes (CNTs), and graphene as potential adsorbents for these pollutants has been critically reviewed and analyzed. Under similar conditions, the use of porous polymers such as Chitosan and molecularly imprinted polymers (MIPs) have been well presented. The high adsorption capacities of advanced porous materials such as mesoporous silica and metal-organic frameworks have been considered and evaluated. The preference of these materials, higher adsorption efficiencies, mechanism of adsorptions, and possible challenges have been discussed. Recommendations have been proposed for commercialization, pilot, and industrial-scale applications of the studied adsorbents towards persistent organic pollutants (POPs) removal from wastewater.

Srinivasulu Kanaparthi, Shiv Govind Singh

Materials Science for Energy Technologies • 2019

Detecting ammonia in ambient air with high sensitivity and ultra-fast responsivity is crucial given its implications on human health. The response of such sensors should also be reversible to use them for continuous monitoring. Herein, we report a reversible ammonia (NH3) sensor based on 2D ZnO nanoflakes at 250 °C. The sensor exhibited a maximum response of 80% and sub-15 s response and recovery times upon exposure of 0.6–3 ppm NH3. Further, we formulated and corrected the baseline drift with a simple and straightforward baseline manipulation method. The excellent response of the sensor indicates the feasibility of using it in diverse applications where high sensitivity and rapid response are crucial.

Prachiben Panchal, Emmanuel O. Ogunsona, Tizazu H. Mekonnen

Processes • 2018

The need to transition to more sustainable and renewable technology has resulted in a focus on cellulose nanofibrils (CNFs) and nanocrystals (CNCs) as one of the materials of the future with potential for replacing currently used synthetic materials. Its abundance and bio-derived source make it attractive and sought after as well. CNFs and CNCs are naturally hydrophilic due to the abundance of -OH group on their surface which makes them an excellent recipient for applications in the medical industry. However, the hydrophilicity is a deterrent to many other industries, subsequently limiting their application scope. In either light, the increased rate of progress using CNCs in advanced materials applications are well underway and is becoming applicable on an industrial scale. Therefore, this review explores the current modification platforms and processes of nanocellulose directly as functional materials and as carriers/substrates of other functional materials for advanced materials applications. Niche functional attributes such as superhydrophobicity, barrier, electrical, and antimicrobial properties are reviewed due to the focus and significance of such attributes in industrial applications.

Jinsong Zeng, Zhanting Zeng, Zheng Cheng et al.

Scientific Reports • 2021

Recycled paper and some hardwood paper often display poorer mechanical properties, which hinder its practical applications and need to be addressed. In this work, cellulose nanofibrils (CNFs) obtained by a combined process of enzymatic hydrolysis and grinding (EG-CNFs), grinding and microfluidization (GH-CNFs) or TEMPO-mediated oxidation and grinding (TE-CNFs) were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Moreover, CNFs were made into films on which some characterizations including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and UV-Vis transmittance spectroscopy were implemented. Results showed that CNF fibrillation was promoted as times of passes increased in microfluidization, and CNFs pretreated by enzyme possessed shorter length. Crystallinity of CNFs was related to CNF manufacturing methods, while CNF films' transparency was correlated to CNF diameter distributions. Moreover, CNFs were applied with different dosages on recycled and hardwood paper. Lengths of CNFs, strength of CNF network, and pulp properties were critical factors affecting the mechanical strength of CNFs-enhanced paper. GH-CNFs showed better strengthened effect on tensile strength of paper than TE-CNFs and EG-CNFs. The best overall improvement was achieved at GH-CNF10 dosage of 5.0 wt% on hardwood paper. The increment of tensile index, burst index, and folding endurance were 108.32%, 104.65%, and 600%, respectively. This work aims to find out the relationship between production methods and morphologies of CNFs and how the morphological characteristics of CNFs affecting the mechanical performance of paper when they are added as strength additives.

Tan Nhiem Ly, Sangkwon Park

Scientific Reports • 2018

In this study, we fabricate ammonia sensors based on hybrid thin films of reduced graphene oxide (RGO) and conducting polymers using the Langmuir-Schaefer (LS) technique. The RGO is first prepared using hydrazine (Hy) and/or pyrrole (Py) as the reducing agents, and the resulting pyrrole-reduced RGO (Py-RGO) is then hybridized with polyaniline (PANI) and/or polypyrrole (PPy) by in-situ polymerization. The four different thin films of Hy-RGO, Py-RGO, Py-RGO/PANI, and Py-RGO/PPy are deposited on interdigitated microelectrodes by the LS techniques, and their structures are characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results of ammonia sensing experiments indicate that the Py-RGO/PANI film exhibits the highest sensor response of these four films, and that it exhibits high reproducibility, high linearity of concentration dependency, and a very low detection limit (0.2 ppm) both in N 2 and exhaled air environments. The current gas sensor, therefore, has potential for diagnostic purposes because it has the additional advantages of facile fabrication, ease of use at room temperature, and portability compared to conventional high-sensitivity ammonia sensors.

Tobias Keplinger, Xiaoqing Wang, Ingo Burgert

Journal of Materials Chemistry A • 2019

We compare functional NFC composites and wood derived scaffolds regarding mechanical performance, electric and magnetic properties as well as oil/water separation and heavy metal remediation.