Amanda Prado de Nicolás, Ángel Molina‐García, Juan T. García et al.

Journal of Cleaner Production • 2022

Water is at the core of sustainable development. Moreover, it is essential for social, economic, and environmental well-being. However, water resource availability has been significantly threatened in the 21st century. In general, freshwater supplies are being depleted by natural and anthropogenic activities, such as rapid population growth, industrialization, and intensive agriculture. In addition, one of the main causes of water resource shortages is water body contamination. Nitrate pollution is considered one of the most pressing global environmental problems, both in surface and groundwater. The literature reveals that numerous nitrogen removal processes have been developed and proposed. To overcome this problem, desalination is a robust and mature technique for obtaining fresh water from saltwater, and is considered an efficient and reliable process. However, there is growing concern about the adverse environmental impacts generated by brine where concentrated rejection by desalination results in high salinity together with chemical residues. To solve this problem, a zero liquid discharge (ZLD) strategy has been proposed in the specific literature. Furthermore, ZLD can be used to treat and recover valuable resources. This study analyzes and discusses the current status of brine treatment technologies targeting ZLD, highlighting their advantages and disadvantages. Technologies based on membranes and thermal energy were also analyzed, and their performance and operating costs were compared. Finally, the different denitrification processes are listed. This ZLD solution is currently considered an essential and compulsory treatment in reject brine to remove nitrate that, because of high concentrations in the environment, is one of the most widespread global contaminants.

Jesús Morón-López, Lucía Nieto-Reyes, Sónia Aguado et al.

Chemosphere • 2019

Iwona Gajda, Oluwatosin Obata, M.J. Salar-García et al.

Bioelectrochemistry • 2020

In order to improve the potential of Microbial Fuel Cells (MFCs) as an applicable technology, the main challenge is to engineer practical systems for bioenergy production at larger scales and to test how the prototypes withstand the challenges occurring during the prolonged operation under constant feeding regime with real waste stream. This work presents the performance assessment of low-cost ceramic MFCs in the individual, stacked (modular) and modular cascade (3 modules) configurations during long term operation up to 19 months, utilising neat human urine as feedstock. During 1 year, the performance of the individual MFC units reached up to 1.56 mW (22.3 W/m 3 ), exhibiting only 20% power loss on day 350 which was significantly smaller in comparison to conventional proton or cation exchange membranes. The stack module comprising 22 MFCs reached up to 21.4 mW (11.9 W/m 3 ) showing power recovery to the initial output levels after 580 days, whereas the 3-module cascade reached up to 75 mW (13.9 W/m 3 ) of power, showing 20% power loss on day 446. In terms of chemical oxygen demand (COD) removal, the 3-module cascade configuration achieved a cumulative reduction of >92%, which is higher than that observed in the single module (56%).

M.M. Harussani, Shou Cheng, Jeffrey S. Cross

Sustainability • 2023

Crude glycerol is the main byproduct of biodiesel manufacturing from oleaginous crops and other biomass-derived oils. Approximately 10% crude glycerol is produced with every batch of biodiesel. Worldwide, there is a glut of glycerol and the price of it has decreased considerably. There are real opportunities for valorizing crude glycerol into higher value-added chemicals which can improve the economic viability of biodiesel production as an alternative fuel. Exploring new potential applications of glycerol in various sectors is needed such as in pharmaceuticals, food and beverages, cosmetics, and as a transportation fuel. However, crude glycerol produced directly from biodiesel often contains impurities that hinder its direct industrial usage and thus, a refining process is needed which is typically expensive. Hence, this review reports on current upgrading crude glycerol technologies—thermo-, bio-, physico-, and electrochemical approaches—that valorize it into higher value-added chemicals. Through comparison between those viable upgrading techniques, future research directions, challenges, and advantages/disadvantage of the technologies are described. Electrochemical technology, which is still underdeveloped in this field, is highlighted, due to its simplicity, low maintenance cost, and it working in ambient condition, as it shows promising potential to be applied as a major glycerol upgrading technique.

Zhijie Chen, Yiwen Liu, Wei Wei et al.

Environmental Science Nano • 2019

Advanced electrocatalysts for halogenated organic pollutant degradation.

Ömür Gökkuş, Enric Brillas, Ignasi Sirés

The Science of The Total Environment • 2023

The decolorization and TOC removal of solutions of Acid Brown 14 (AB14) diazo dye containing 50 mg L -1 of total organic carbon (TOC) have been first studied in a continuous-flow electrocoagulation (EC) reactor of 3 L capacity with Fe electrodes of ∼110 cm 2 area each. Total loss of color with poor TOC removal was found in chloride, sulfate, and/or hydrogen carbonate matrices after 18 min of this treatment. The best performance was found using 5 anodes and 4 cathodes of Fe at 13.70 A and low liquid flow rate of 10 L h -1 , in aerated 39.6 mM NaCl medium within a pH range of 4.0-10.0. The effluent obtained from EC was further treated by electro-Fenton (EF) using a 2.5 L pre-pilot flow plant, which was equipped with a filter-press cell comprising a Pt anode and an air-diffusion cathode for H 2 O 2 electrogeneration. Operating with 0.10-1.0 mM Fe 2+ as catalyst at pH 3.0 and 50 mA cm -2 , a similar TOC removal of 68 % was found as maximal in chloride and sulfate media using the sequential EC-EF process. The EC-treated solutions were also treated by photoelectro-Fenton (PEF) employing a photoreactor with a 125 W UVA lamp. The sequential EC-PEF process yielded a much higher TOC reduction, close to 90 % and 97 % in chloride and sulfate media, respectively, due to the rapid photolysis of the final Fe(III)-carboxylate complexes. The formation of recalcitrant chloroderivatives from generated active chlorine limited the mineralization in the chloride matrix. For practical applications of this two-step technology, the high energy consumption of the UVA lamp in PEF could be reduced by using free sunlight.

Caiqin Wang, Lu Ye, Jie Jin et al.

Scientific Reports • 2017

Direct interspecies electron transfer (DIET) among the cometabolism microbes plays a key role in the anaerobic degradation of persistent organic pollutants and stability of anaerobic bioreactor. In this study, the COD removal efficiency increased to 99.0% during the start-up stage in the combined bioelectrode-UASB system (R1) with magnetite nanoparticles addition, which was higher than those in the coupled bioelectrode-UASB (R2; 83.2%) and regular UASB (R3; 71.0%). During the stable stage, the increase of 2,4-dichloronitrobenzene (2,4-DClNB) concentration from 25 mg L -1 to 200 mg L -1 did not affect the COD removal efficiencies in R1 and R2, whereas the performance of R3 was deteriorated obviously. Further intermediates analysis indicated that magnetite nanoparticles enhanced the reductive dechlorination of 2,4-DClNB. High-throughput sequencing results showed that the functional microbes like Syntrophobacter and Syntrophomonas which have been reported to favor the DIET, were predominant on the cathode surface of R1 reactor. It is speculated that the addition of magnetite nanoparticles favors the cooperative metabolism of dechlorinating microbes and electricigens during 2,4-DClNB degradation process in the combined bioelectrode-UASB reactor. This study may provide a new strategy to improve the performance of microbial electrolysis cells and enhance the pollutant removal efficiency.

Jerome Michael Bidu, Bart Van der Bruggen, Mwemezi J. Rwiza et al.

Water Science & Technology • 2021

Textile wastewater from wet processing units is a major environmental problem. Most chemicals, including dyes, are only partly consumed, resulting in highly colored wastewater containing a variety of chemicals released into the environment. This paper gives information on the current management of textile wastewater in Tanzania. A semiquantitative analysis was done to identify the main types of chemicals used in wet processing units, wastewater characteristics and existing wastewater treatment methods in the textile industry. The performance evaluation of the existing wastewater treatment plants is also discussed. The advantages of integrating constructed wetlands with the existing treatment facilities for textile wastewater are explained. It has been observed that pretreatment and dying/printing of the fabrics are the main two processes that produce wastewater in many textile companies. Main pollutants are chemicals used from pretreatment and materials removed from de-sizing, bleaching and scouring processes. Dyes, printing pigments and dye auxiliaries are the main pollutants from the dyeing/printing process. Most of the textile companies in Tanzania are equipped with effluent treatment plants. Wastewater treatment plants have basically similar units, which are coagulation-flocculation, sedimentation through clarifiers and aerobic reactor. However, their effluents do not meet discharge limits stipulated by the Tanzania Bureau of Standards (TBS).

Qingqing Song, Fanying Kong, Bing-Feng Liu et al.

Environmental Science and Ecotechnology • 2024

Chlorinated organic pollutants constitute a significant category of persistent organic pollutants due to their widespread presence in the environment, which is primarily attributed to the expansion of agricultural and industrial activities. These pollutants are characterized by their persistence, potent toxicity, and capability for long-range dispersion, emphasizing the importance of their eradication to mitigate environmental pollution. While conventional methods for removing chlorinated organic pollutants encompass advanced oxidation, catalytic oxidation, and bioremediation, the utilization of biochar has emerged as a prominent green and efficacious method in recent years. Here we review biochar's role in remediating typical chlorinated organics, including polychlorinated biphenyls (PCBs), triclosan (TCS), trichloroethene (TCE), tetrachloroethylene (PCE), organochlorine pesticides (OCPs), and chlorobenzenes (CBs). We focus on the impact of biochar material properties on the adsorption mechanisms of chlorinated organics. This review highlights the use of biochar as a sustainable and eco-friendly method for removing chlorinated organic pollutants, especially when combined with biological or chemical strategies. Biochar facilitates electron transfer efficiency between microorganisms, promoting the growth of dechlorinating bacteria and mitigating the toxicity of chlorinated organics through adsorption. Furthermore, biochar can activate processes such as advanced oxidation or nano zero-valent iron, generating free radicals to decompose chlorinated organic compounds. We observe a broader application of biochar and bioprocesses for treating chlorinated organic pollutants in soil, reducing environmental impacts. Conversely, for water-based pollutants, integrating biochar with chemical methods proved more effective, leading to superior purification results. This review contributes to the theoretical and practical application of biochar for removing environmental chlorinated organic pollutants.

Vincenzo Vaiano, Iolanda De Marco

Separations • 2023

Azo dyes are synthetic organic dyes used in the textile, leather, and paper industries. They pose environmental problems due to their toxic and persistent nature. The toxicity is due to the presence of azo groups in the dye molecule that can break down into aromatic amines, which are highly toxic to aquatic organisms and humans. Various treatment methods have been developed to remove azo dyes from wastewater. Conventional wastewater treatments have some drawbacks, such as high operating costs, long processing times, generation of sludge, and the formation of toxic by-products. For these reasons, a valid alternative is constituted by advanced oxidation processes. Good results have been obtained using heterogeneous photocatalysis and supercritical water oxidation. In the former method, a photocatalyst is in contact with wastewater, a suitable light activates the catalyst, and generated reactive oxygen species that react with pollutants through oxidative reactions to their complete mineralization; the latter involves pressurizing and heating wastewater to supercritical conditions in a reactor vessel, adding an oxidizing agent to the supercritical water, and allowing the mixture to react. In this review paper, works in the literature that deal with processing wastewater containing azo dyes through photocatalysts immobilized on macroscopic supports (structured photocatalysts) and the supercritical water oxidation technique have been critically analyzed. In particular, advancement in the formulation of structured photocatalysts for the degradation of azo dyes has been shown, underlying different important features, such as the type of support for the photoactive phase, reactor configuration, and photocatalytic efficiency in terms of dye degradation and photocatalyst stability. In the case of supercritical water oxidation, the main results regarding COD and TOC removal from wastewater containing azo dyes have been reported, taking into account the reactor type, operating pressure, and temperature, as well as the reaction time.

Grzegorz Pasternak, John Greenman, Ioannis Ieropoulos

Applied Energy • 2016

Air cathode microbial fuel cells (MFCs) were used in a cascade-system, to treat neat human urine as the fuel. Their long-term operation caused biodeterioration and biofouling of the cathodes. The cathodes were made from two graphite-painted layers, separated by a current collector. The initial performance of the MFCs was reaching average values of 105.5 ± 32.2 μW and current of 1164.5 ± 120.2 μA. After 3 months of operation the power performance decreased to 9.8 ± 3.5 μW, whilst current decreased to 461.2 ± 137.5 μA. Polarisation studies revealed significant transport losses accompanied by a biofilm formation on the cathodes. The alkaline lysis procedure was established to remove the biomass and chemical compounds adsorbed on the cathode's surface. As a result, the current increased from 378.6 ± 108.3 μA to 503.8 ± 95.6 μA. The additional step of replacing the outer layer of the cathode resulted in a further increase of current to 698.1 ± 130 μA. Similarly, the power performance of the MFCs was recovered to the original level reaching 105.3 ± 16.3 μW, which corresponds to 100% recovery. Monitoring bacterial cell number on the cathode's surface showed that biofilm formed during operation was successfully removed and composed mainly of dead bacterial cells after treatment. To the best of the authors' knowledge, this is the first time that the performance of deteriorating cathodes, has been successfully recovered for MFCs in-situ . Through this easy, fast and inexpensive procedure, designing multilayer cathodes may help enhance the range of operating conditions, if a biofilm forms on their surface.

Hou-Yun Yang, Chuan-Shu He, Lei Li et al.

Scientific Reports • 2016

This study explored the influence of several key factors on the process and kinetics of azo dye decolourization in bioelectrochemical systems (BESs), including cathode potential, dissolved oxygen (DO) concentration of catholyte and biofilm formed on the cathode. The results show that azo dye methyl orange (MO) decolourization in the BES could be well described with the pseudo first-order kinetics. The MO decolourization efficiency increased from 0 to 94.90 ± 0.01% and correspondingly the reaction rate constant increased from 0 to 0.503 ± 0.001 h(-1) with the decrease in cathodic electrode potential from -0.2 to -0.8 V vs Ag/AgCl. On the contrary, DO concentration of the catholyte had a negative impact on MO decolourization in the BES. When DO concentration increased from zero to 5.80 mg L(-1), the MO decolourization efficiency decreased from 87.19 ± 4.73% to 27.77 ± 0.06% and correspondingly the reaction rate constant reduced from 0.207 ± 0.042 to 0.033 ± 0.007 h(-1). Additionally, the results suggest that the biofilm formed on the cathode could led to an adverse rather than a positive effect on azo dye decolourization in the BES in terms of efficiency and kinetics.

Eike Janesch, J.P. Pereira, Peter Neubauer et al.

Frontiers in Chemical Engineering • 2021

The flexibilization of bioenergy production has the potential to counteract partly other fluctuating renewable energy sources (such as wind and solar power). As a weather-independent energy source, anaerobic digestion (AD) can offer on-demand energy supply through biogas production. Separation of the stages in anaerobic digestion represents a promising strategy for the flexibilization of the fermentative part of biogas production. Segregation in two reactor systems facilitates monitoring and control of the provision of educts to the second methanogenic stage, thus controlling biogas production. Two-stage operation has proven to reach similar or even higher methane yields and biogas purities than single-stage operation in many different fields of application. It furthermore allows methanation of green hydrogen and an easier combination of material and energy use of many biogenic raw and residual biomass sources. A lot of research has been conducted in recent years regarding the process phase separation in multi-stage AD operation, which includes more than two stages. Reliable monitoring tools, coupled with effluent recirculation, bioaugmentation and simulation have the potential to overcome the current drawbacks of a sophisticated and unstable operation. This review aims to summarize recent developments, new perspectives for coupling processes for energy and material use and a system integration of AD for power-to-gas applications. Thereby, cell physiological and engineering aspects as well as the basic economic feasibility are discussed. As conclusion, monitoring and control concepts as well as suitable separation technologies and finally the data basis for techno-economic and ecologic assessments have to be improved.

Chenbing Ai, Yan Zhang, Shanshan Hou et al.

Minerals • 2020

Acid mine drainage (AMD), characterized by a high concentration of heavy metals, poses a threat to the ecosystem and human health. Bioelectrochemical system (BES) is a promising technology for the simultaneous treatment of organic wastewater and recovery of metal ions from AMD. Different kinds of organic wastewater usually contain different predominant organic chemicals. However, the effect of different energy substrates on AMD treatment and microbial communities of BES remains largely unknown. Here, results showed that different energy substrates (such as glucose, acetate, ethanol, or lactate) affected the startup, maximum voltage output, power density, coulombic efficiency, and microbial communities of the microbial fuel cell (MFC). Compared with the maximum voltage output (55 mV) obtained by glucose-fed-MFC, much higher maximum voltage output (187 to 212 mV) was achieved by MFCs fed individually with other energy substrates. Acetate-fed-MFC showed the highest power density (195.07 mW/m2), followed by lactate (98.63 mW/m2), ethanol (52.02 mW/m2), and glucose (3.23 mW/m2). Microbial community analysis indicated that the microbial communities of anodic electroactive biofilms changed with different energy substrates. The unclassified_f_Enterobacteriaceae (87.48%) was predominant in glucose-fed-MFC, while Geobacter species only accounted for 0.63%. The genera of Methanobrevibacter (23.70%), Burkholderia-Paraburkholderia (23.47%), and Geobacter (11.90%) were the major genera enriched in the ethanol-fed-MFC. Geobacter was most predominant in MFC enriched by lactate (45.28%) or acetate (49.72%). Results showed that the abundance of exoelectrogens Geobacter species correlated to electricity-generation capacities of electroactive biofilms. Electroactive biofilms enriched with acetate, lactate, or ethanol effectively recovered all Cu2+ ion (349 mg/L) of simulated AMD in a cathodic chamber within 53 h by reduction as Cu0 on the cathode. However, only 34.65% of the total Cu2+ ion was removed in glucose-fed-MFC by precipitation with anions and cations rather than Cu0 on the cathode.

Hui Guo, Younggy Kim

Biotechnology for Biofuels • 2019

The MECs with the stacked electrode design successfully enhanced the electric current generation. The high OLR is important to maintain the high electric current. The organics were removed rapidly and the total suspended solids (TSS) and VSS were reduced substantially in the continuous-flow MEC system. Therefore, the MECs with the stacked electrode design can be used for the rapid and low-sludge treatment of domestic wastewater.

Xinyi Dong, Hongbo Liu, Shiping Long et al.

The Science of The Total Environment • 2021

Marco Vocciante, Vincenzo G. Dovì, Sergio Ferro

Sustainability • 2021

In recent years, the development of suitable technologies for the remediation of environmental contaminations has attracted considerable attention. Among these, electrochemical approaches have gained prominence thanks to the many possible applications and their proven effectiveness. This is particularly evident in the case of inorganic/ionic contaminants, which are not subject to natural attenuation (biological degradation) and are difficult to treat adequately with conventional methods. The purpose of this contribution is to present a critical overview of electrokinetic remediation with particular attention on the sustainability of the various applications. The basis of technology will be briefly mentioned, together with the phenomena that occur in the soil and how that will allow its effectiveness. The main critical issues related to this approach will then be presented, highlighting the problems in terms of sustainability, and discussing some possible solutions to reduce the environmental impact and increase the cost-effectiveness and sustainability of this promising technology.

Eka Latiffah Nadia Dzulkarnain, Jemilatu Omuwa Audu, Wan Rosmiza Zana Wan Dagang et al.

Bioresources and Bioprocessing • 2022

Biohydrogen production through dark fermentation is very attractive as a solution to help mitigate the effects of climate change, via cleaner bioenergy production. Dark fermentation is a process where organic substrates are converted into bioenergy, driven by a complex community of microorganisms of different functional guilds. Understanding of the microbiomes underpinning the fermentation of organic matter and conversion to hydrogen, and the interactions among various distinct trophic groups during the process, is critical in order to assist in the process optimisations. Research in biohydrogen production via dark fermentation is currently advancing rapidly, and various microbiology and molecular biology tools have been used to investigate the microbiomes. We reviewed here the different systems used and the production capacity, together with the diversity of the microbiomes used in the dark fermentation of industrial wastes, with a special emphasis on palm oil mill effluent (POME). The current challenges associated with biohydrogen production were also included. Then, we summarised and discussed the different molecular biology tools employed to investigate the intricacy of the microbial ecology associated with biohydrogen production. Finally, we included a section on the future outlook of how microbiome-based technologies and knowledge can be used effectively in biohydrogen production systems, in order to maximise the production output.

Ioannis Ieropoulos, Grzegorz Pasternak, John Greenman

PLoS ONE • 2017

Microbial Fuel Cells (MFCs) are emerging as an effective means of treating different types of waste including urine and wastewater. However, the fate of pathogens in an MFC-based system remains unknown, and in this study we investigated the effect of introducing the enteric pathogen Salmonella enterica serovar enteritidis in an MFC cascade system. The MFCs continuously fed with urine showed high disinfecting potential. As part of two independent trials, during which the bioluminescent S. enteritidis strain was introduced into the MFC cascade, the number of viable counts and the level of bioluminescence were reduced by up to 4.43±0.04 and 4.21±0.01 log-fold, respectively. The killing efficacy observed for the MFCs operating under closed-circuit conditions, were higher by 1.69 and 1.72 log-fold reduction than for the open circuit MFCs, in both independent trials. The results indicated that the bactericidal properties of a well performing anode were dependent on power performance and the oxidation-reduction potential recorded for the MFCs. This is the first time that the fate of pathogenic bacteria has been investigated in continuously operating MFC systems.

Takahiro Yamashita, Natsuki Ookawa, Mitsuyoshi Ishida et al.

Scientific Reports • 2016

Biochemical oxygen demand (BOD) is a widely used index of water-quality assessment. Since bioelectrochemical BOD biosensors require anaerobic conditions for anodic reactions, they are not directly used in aerobic environments such as aeration tanks. Normally, the BOD biosensors are closed-type, where the anode is packed inside a closed chamber to avoid exposure to oxygen. In this study, a novel bioelectrochemical open-type biosensor was designed for in-situ monitoring of BOD during intermittent aeration. The open-type anode, without any protection against exposure to oxygen, was directly inserted into an intermittently aerated tank filled with livestock wastewater. Anodic potential was controlled using a potentiostat. Interestingly, this novel biosensor generated similar levels of current under both aerating and non-aerating conditions, and showed a logarithmic correlation (R 2 > 0.9) of current with BOD concentrations up to 250 mg/L. Suspended solids in the wastewater attached to and covered the whole anode, presumably leading to the production of anaerobic conditions inside the covered anode via biological oxygen removal. Exoelectrogenic anaerobes (Geobacter spp.) were detected inside the covered anode using the 16S-rRNA gene. This biosensor will have various practical applications, such as the automatic control of aeration intensity and the in-situ monitoring of natural water environments.

Catia Algieri, Gerardo Coppola, Debolina Mukherjee et al.

Catalysts • 2021

Catalytic membrane reactors have been widely used in different production industries around the world. Applying a catalytic membrane reactor (CMR) reduces waste generation from a cleaner process perspective and reduces energy consumption in line with the process intensification strategy. A CMR combines a chemical or biochemical reaction with a membrane separation process in a single unit by improving the performance of the process in terms of conversion and selectivity. The core of the CMR is the membrane which can be polymeric or inorganic depending on the operating conditions of the catalytic process. Besides, the membrane can be inert or catalytically active. The number of studies devoted to applying CMR with higher membrane area per unit volume in multi-phase reactions remains very limited for both catalytic polymeric and inorganic membranes. The various bio-based catalytic membrane system is also used in a different commercial application. The opportunities and advantages offered by applying catalytic membrane reactors to multi-phase systems need to be further explored. In this review, the preparation and the application of inorganic membrane reactors in the different catalytic processes as water gas shift (WGS), Fisher Tropsch synthesis (FTS), selective CO oxidation (CO SeLox), and so on, have been discussed.

Rubén González, Daniela Carrillo‐Peña, Xiomar Gómez

Applied Sciences • 2022

Anaerobic digestion is one of the technologies that will play a key role in the decarbonization of the economy, due to its capacity to treat organic waste, recover nutrients and simultaneously produce biogas as a renewable biofuel. This feature also makes this technology a relevant partner for approaching a circular economic model. However, the low biogas yield of traditional substrates such as sewage sludge and livestock waste along with high installation costs limit its profitability. Further expansion of this technology encounters several barriers, making it necessary to seek improvements to attain a favorable financial balance. The use of co-substrates benefits the overall digestion performance thanks to the balancing of nutrients, the enhanced conversion of organic matter and stabilization, leading to an increase in biogas production and process economics. This article reviews the main co-substrates used in anaerobic digestion, highlighting their characteristics in terms of methane production, kinetic models commonly used and the synergistic effects described in the literature. The main process parameters and their influence on digestion performance are presented, as well as the current lines of research dedicated to improving biogas yields, focusing on the addition of hydrogen, bioaugmentation, supplementation with carbon compounds and nanoparticles, the introduction of bioelectrodes and adsorbents. These techniques allow a significant increase in waste degradation and reduce inhibitory conditions, thus favoring process outcomes. Future research should focus on global process efficiency, making particular emphasis on the extrapolation of laboratory achievements into large-scale applications, by analyzing logistical issues, global energy demand and economic feasibility.

Suanny Mosquera-Romero, Eleftheria Ntagia, Diederik P.L. Rousseau et al.

Environmental Science and Ecotechnology • 2023

Seasonal or permanent water scarcity in off-grid communities can be alleviated by recycling water in decentralized wastewater treatment systems. Nature-based solutions, such as constructed wetlands (CWs), have become popular solutions for sanitation in remote locations. Although typical CWs can efficiently remove solids and organics to meet water reuse standards, polishing remains necessary for other parameters, such as pathogens, nutrients, and recalcitrant pollutants. Different CW designs and CWs coupled with electrochemical technologies have been proposed to improve treatment efficiency. Electrochemical systems (ECs) have been either implemented within the CW bed (ECin-CW) or as a stage in a sequential treatment (CW + EC). A large body of literature has focused on ECin-CW, and multiple scaled-up systems have recently been successfully implemented, primarily to remove recalcitrant organics. Conversely, only a few reports have explored the opportunity to polish CW effluents in a downstream electrochemical module for the electro-oxidation of micropollutants or electro-disinfection of pathogens to meet more stringent water reuse standards. This paper aims to critically review the opportunities, challenges, and future research directions of the different couplings of CW with EC as a decentralized technology for water treatment and recovery.

Neha Chandel, Vishal Ahuja, Ranjit Gurav et al.

The Science of The Total Environment • 2022

Giacomo Proietti Tocca, Valeria Agostino, Barbara Menin et al.

Reviews in Environmental Science and Bio/Technology • 2024

Abstract The high metabolic flexibility and biodiversity of microalgae make them promising systems for the production of chemicals and high-value metabolites to be utilized in various industrial applications. Currently, microalgae are primarily cultivated in phototrophic processes or in fermenters using glucose as substrate. However, such configurations are often too costly for the majority of potential applications and require improvements. The use of acetate as substrate to enhance biomass productivity and reduce cost and environmental impacts is a promising solution. In a future bio-based economy, acetate can serve as an excellent intermediate to link many industrial facilities, as it can be synthesized using different technologies from renewable resources as CO 2 and waste. This work provides a detailed description of acetate synthesis processes alternative to the conventional methanol carbonylation, including the pros and cons of each: aerobic and anaerobic fermentations; thermochemical treatments; C1 gas fermentation; microbial electrosynthesis and artificial photosynthesis. Additionally, the utilization of acetate as substrate for microalgae growth in mixotrophic and heterotrophic conditions is reviewed, covering key metabolic and engineering aspects (strains, yields, growth rate, inhibition, productivity, process configuration). These aspects serve as guidelines for a rationale design of an algal cultivation process based on acetate as a carbon source. Finally, the review critically assesses the state of the art of coupling of acetate-rich streams with algal biomass production, highlighting the pros and cons and addressing the main knowledge gaps to be filled through future research.

Lars Bjørn Silva Thomsen, Konstantinos Anastasakis, Patrick Biller

Water Research • 2021

Hydrothermal liquefaction (HTL) is a thermochemical process for the conversion of biomass into bio-crude oil. However, treatment of post-HTL aqueous by-products is an emerging issue towards the commercialisation of HTL technology. This study investigates the use of non-catalytic wet oxidation (WO) for the reduction of organic compounds and heat production at different temperatures (200-350 °C), residence times (RT) (2-180 min) and excess oxygen. The aqueous phase from HTL of sewage sludge is investigated, and 97.6% of the chemical oxygen demand (COD) and 96.1% of the total organic carbon (TOC) were removed at the highest temperature and retention time. The minimum energy requirement achieved was 9.6 kWh/kg COD removed at 200 °C for 180 min, and the exothermic reactions of the process can generate 28.3% of the required heat. GC-FID and -MS analysis revealed that the degradation of different groups of organic compounds generates acetic acid as an intermediate by-product of WO, being further oxidised at temperatures higher than 300 °C. NH 4 + and NH 3 are generated from the decomposition of nitrogenated organic compounds showing the highest concentration of 704.5 mg NH4+ /L at 350 °C after 180 min.

Grzegorz Pasternak, John Greenman, Ioannis Ieropoulos

Journal of Power Sources • 2018

Appropriate inoculation and maturation may be crucial for shortening the startup time and maximising power output of Microbial Fuel Cells (MFCs), whilst ensuring stable operation. In this study we explore the relationship between electrochemical parameters of MFCs matured under different external resistance (R ext ) values (50 Ω - 10 kΩ) using non-synthetic fuel (human urine). Maturing the biofilm under the lower selected R ext results in improved power performance and lowest internal resistance (R int ), whereas using higher R ext results in increased ohmic losses and inferior performance. When the optimal load is applied to the MFCs following maturity, dependence of microbial activity on original R ext values does not change, suggesting an irreversible effect on the biofilm, within the timeframe of the reported experiments. Biofilm microarchitecture is affected by R ext and plays an important role in MFC efficiency. Presence of water channels, EPS and precipitated salts is distinctive for higher R ext and open circuit MFCs. Correlation analysis reveals that the biofilm changes most dynamically in the first 5 weeks of operation and that fixed R ext lefts an electrochemical effect on biofilm performance. Therefore, the initial conditions of the biofilm development can affect its long-term structure, properties and activity.

Tao Wang, Gefu Zhu, Bin Kuang et al.

Water Research • 2021

Marlies Christiaens, Kai M. Udert, Jan Arends et al.

Water Research • 2018

Hwi Jong Jung, Sahng Hyuck Woo, Danbee Kim et al.

Chemical Engineering Journal • 2026

Maryam Amini, Jonny Hisdal, Håvard Kalvøy

Journal of Electrical Bioimpedance • 2018

Rapid development in the field of tissue engineering necessitates implementation of monitoring methods for evaluation of the viability and characteristics of the cell cultures in a real-time, non-invasive and non-destructive manner. Current monitoring techniques are mainly histological and require labeling and involve destructive tests to characterize cell cultures. Bioimpedance measurement technique which benefits from measurement of electrical properties of the biological tissues, offers a non-invasive, label-free and real-time solution for monitoring tissue engineered constructs. This review outlines the fundamentals of bioimpedance, as well as electrical properties of the biological tissues, different types of cell culture constructs and possible electrode configuration set ups for performing bioimpedance measurements on these cell cultures. In addition, various bioimpedance measurement techniques and their applications in the field of tissue engineering are discussed.

Bilal Mughal, Syed Zohaib Javaid Zaidi, Xunli Zhang et al.

Applied Sciences • 2021

Nanotechnology plays a big part in our modern daily lives, ranging from the biomedical sector to the energy sector. There are different physicochemical and biological methods to synthesise nanoparticles towards multiple applications. Biogenic production of nanoparticles through the utilisation of microorganisms provides great advantages over other techniques and is increasingly being explored. This review examines the process of the biogenic synthesis of nanoparticles mediated by microorganisms such as bacteria, fungi and algae, and their applications. Microorganisms offer a disparate environment for nanoparticle synthesis. Optimum production and minimum time to obtain the desired size and shape, to improve the stability of nanoparticles and to optimise specific microorganisms for specific applications are the challenges to address, however. Numerous applications of biogenic nanoparticles in medicine, environment, drug delivery and biochemical sensors are discussed.

Kanika Arora, Parneet Kaur, Pradeep Kumar et al.

Frontiers in Energy Research • 2021

Wastewater is not a liability, instead considered as a resource for microbial fermentation and value-added products. Most of the wastewater contains various nutrients like nitrates and phosphates apart from the organic constituents that favor microbial growth. Microalgae are unicellular aquatic organisms and are widely used for wastewater treatment. Various cultivation methods such as open, closed, and integrated have been reported for microalgal cultivation to treat wastewater and resource recovery simultaneously. Microalgal growth is affected by various factors such as sunlight, temperature, pH, and nutrients that affect the growth rate of microalgae. Microalgae can consume urea, phosphates, and metals such as magnesium, zinc, lead, cadmium, arsenic, etc. for their growth and reduces the biochemical oxygen demand (BOD). The microalgal biomass produced during the wastewater treatment can be further used to produce carbon-neutral products such as biofuel, feed, bio-fertilizer, bioplastic, and exopolysaccharides. Integration of wastewater treatment with microalgal bio-refinery not only solves the wastewater treatment problem but also generates revenue and supports a sustainable and circular bio-economy. The present review will highlight the current and advanced methods used to integrate microalgae for the complete reclamation of nutrients from industrial wastewater sources and their utilization for value-added compound production. Furthermore, pertaining challenges are briefly discussed along with the techno-economic analysis of current pilot-scale projects worldwide.

L. Jiang, Weiting Liu, R.Q. Wang et al.

Progress in Energy and Combustion Science • 2023

Direct air capture (DAC) is gathering momentum since it has vast potential and high flexibility to collect CO2 from discrete sources as “synthetic tree” when compared with current CO2 capture technologies, e.g., amine based post-combustion capture. It is considered as one of the emerging carbon capture technologies in recent decades and remains in a prototype investigation stage with many technical challenges to be overcome. The objective of this paper is to comprehensively discuss the state-of-the-art of DAC and CO2 utilization, note unresolved technology bottlenecks, and give investigation perspectives for commercial large-scale applications. Firstly, characteristics of physical and chemical sorbents are evaluated. Then, the representative capture processes, e.g., pressure swing adsorption, temperature swing adsorption and other ongoing absorption chemical loops, are described and compared. Methods of CO2 conversion including synthesis of fuels and chemicals as well as biological utilization are reviewed. Finally, techno-economic analysis and life cycle assessment for DAC application are summarized. Based on research achievements, future challenges of DAC and CO2 conversion are presented, which include providing synthesis guidelines for obtaining sorbents with the desired characteristics, uncovering the mechanisms for different working processes and establishing evaluation criteria in terms of technical and economic aspects.

Manel Garrido‐Baserba, Irene Barnosell, María Molinos‐Senante et al.

Water Research • 2022

Water systems need to become more locally robust and sustainable in view of increased population demands and supply uncertainties. Decentralized treatment is often assumed to have the potential to improve the technical, environmental, and economic performance of current technologies. The techno-economic feasibility of implementing independent building-scale decentralized systems combining rainwater harvesting, potable water production, and wastewater treatment and recycling was assessed for six main types of buildings ranging from single-family dwellings to high-rise buildings. Five different treatment layouts were evaluated under five different climatic conditions for each type of building. The layouts considered varying levels of source separation (i.e., black, grey, yellow, brown, and combined wastewater) using the corresponding toilet types (vacuum, urine-diverting, and conventional) and the appropriate pipes and pumping requirements. Our results indicate that the proposed layouts could satisfy 100% of the water demand for the three smallest buildings in all but the aridest climate conditions. For the three larger buildings, rainwater would offset annual water needs by approximately 74 to 100%. A comprehensive economic analysis considering CapEx and OpEx indicated that the cost of installing on-site water harvesting and recycling systems would increase the overall construction cost of multi-family buildings by around 6% and single-family dwellings by about 12%, with relatively low space requirements. For buildings or combined water systems with more than 300 people, the estimated total price of on-site water provision (including harvesting, treatment, recycling, and monitoring) ranged from $1.5/m 3 to $2.7/m, 3 which is considerably less than the typical tariffs collected by utilities in the United States and Western Europe. Where buildings can avoid the need to connect to centralized supplies for potable water and sewage disposal, water costs could be even lower. Urine-diversion has the potential to yield the least expensive solution but is the least well developed and had higher uncertainty in the cost analysis. More mature layouts (e.g., membrane bioreactors) exhibited less cost uncertainty and were economically competitive. Our analysis indicates that existing technologies can be used to create economically viable systems that greatly reduce demands on centralized utilities and, under some conditions, eliminate the need for centralized water supply or sewage collection.

Ahmed I. Osman, Zhonghao Chen, Ahmed M. Elgarahy et al.

Advanced Energy and Sustainability Research • 2024

Membrane technology emerges as a transformative solution for global challenges, excelling in water treatment, gas purification, and waste recycling. This comprehensive review navigates the principles, advantages, challenges, and prospects of membrane technology, emphasizing its pivotal role in addressing contemporary environmental and sustainability issues. The goal is to contribute to environmental objectives by exploring the principles, mechanisms, advantages, and limitations of membrane technology. Noteworthy features include energy efficiency, selectivity, and minimal environmental footprint, distinguishing it from conventional methods. Advances in nanomembranes, organic porous membranes, and metal‐organic frameworks‐based membranes highlight their potential for energy‐efficient contaminant removal. The review underscores the integration of renewable energy sources for eco‐friendly desalination and separation processes. The future trajectory unfolds with next‐gen nanocomposite membranes, sustainable polymers, and optimized energy consumption through electrochemical and hybrid approaches. In healthcare, membrane technology reshapes gas exchange, hemodialysis, biosensors, wound healing, and drug delivery, while in chemical industries, it streamlines organic solvent separation. Challenges like fouling, material stability, and energy efficiency are acknowledged, with the integration of artificial intelligence recognized as a progressing frontier. Despite limitations, membrane technology holds promise for sustainability and revolutionizing diverse industries.

Monika Vítězová, Anna Kohoutová, Tomáš Vítěz et al.

Processes • 2020

Over the past decades, anaerobic biotechnology is commonly used for treating high-strength wastewaters from different industries. This biotechnology depends on interactions and co-operation between microorganisms in the anaerobic environment where many pollutants’ transformation to energy-rich biogas occurs. Properties of wastewater vary across industries and significantly affect microbiome composition in the anaerobic reactor. Methanogenic archaea play a crucial role during anaerobic wastewater treatment. The most abundant acetoclastic methanogens in the anaerobic reactors for industrial wastewater treatment are Methanosarcina sp. and Methanotrix sp. Hydrogenotrophic representatives of methanogens presented in the anaerobic reactors are characterized by a wide species diversity. Methanoculleus sp., Methanobacterium sp. and Methanospirillum sp. prevailed in this group. This work summarizes the relation of industrial wastewater composition and methanogen microbial communities present in different reactors treating these wastewaters.

Madeleine McPherson, Nils Johnson, M. Strubegger

Applied Energy • 2018

Woo Dae Jang, Ji Hyeon Hwang, Hyun Uk Kim et al.

Microbial Biotechnology • 2017

Life cycle of bacterial cellulose. Sustainable production and consumption of bio-based products are showcased using bacterial cellulose as an example.

Way Cern Khor, Stephen Andersen, Han Vervaeren et al.

Biotechnology for Biofuels • 2017

Grass can be utilized as a substrate to produce caproic acid. The biological intermediary steps were enhanced by separating the steps to focus on the lactic acid intermediary. Notably, the pipeline was almost completely powered through electrical inputs, and thus could potentially be driven from sustainable energy without need for chemical input.Graphical abstractMicrobial and electrochemical production of lactic acid, caproic acid and decane from grass.