Zahra Ameri, Mehran Hoodaji, Majid Rajaei et al.

Quality Assurance and Safety of Crops & Foods • 2021

This study investigated the possibility and efficiency of absorbing chromium (VI) (Cr [VI]) ions from the polluted solutions by employing the chemically modified adsorbents (alkali, biochar, and acid rice bran), focusing on the possible impacts of the solution’s pH values, adsorbent’s dosages, concentrations, and contact times. The colori-metric method was used for Cr determination by employing an ultraviolet/visible spectrophotometer. The scanning electron microscope and Fourier transform infrared spectroscopy were used to analyze the characteristics of the modified adsorbents. The findings indicated that the optimized acid, biochar, alkali, and unmodified rice bran removal efficiency for Cr (VI) were 94.50%, 94.27%, 88.60%, and 90.18%, respectively. The increase of adsorbent dosage up to 2 g/L led to a rise in removal effectiveness (82.06%). Furthermore, the highest removal efficiency was obtained (94%) at the pH of 2.0, the contact duration of 100 min, Cr (VI) concentration of 50 mg/L, and dosage of 2 g/L, which was statistically the optimal condition for the modified rice bran. The adsorption kinetics was agreeably suited to pseudo-second-order, whereas the Freundlich isotherm equation was also suitably expounded the study’s findings. The findings implied that the acid and biochar rice bran performed remarkably in the reme-diation of the wastewater compared with alkali rice bran for reuse for industrial, agricultural, and environmental purposes.

Raghad Asad Kadhim ALOBAIDI, Kubra Ulucan‐Altuntas, Rasha Khalid Sabri Mhemid et al.

International Journal of Environmental Research and Public Health • 2021

Although conventional biological treatment plants can remove basic pollutants, they are ineffective at removing recalcitrant pollutants. Membrane bioreactors contain promising technology and have the advantages of better effluent quality and lower sludge production compared to those of conventional biological treatment processes. In this study, the removal of pharmaceutical compounds by membrane bioreactors under different solid retention times (SRTs) was investigated. To study the effect of SRT on the removal of emerging pharmaceuticals, the levels of pharmaceuticals were measured over 96 days for the following retention times: 20, 30, and 40-day SRT. It was found that the 40-day SRT had the optimum performance in terms of the pharmaceuticals' elimination. The removal efficiencies of the chemical oxygen demand (COD) for each selected SRT were higher than 96% at steady-state conditions. The highest degradation efficiency was observed for paracetamol. Paracetamol was the most removed compound followed by ranitidine, atenolol, bezafibrate, diclofenac, and carbamazepine. The microbial community at the phylum level was also analyzed to understand the biodegradability of pharmaceuticals. It was noticed that the Proteobacteria phylum increased from 46.8% to 60.0% after 96 days with the pharmaceuticals. The Actinobacteria class, which can metabolize paracetamol, carbamazepine, and atenolol, was also increased from 9.1% to 17.9% after adding pharmaceuticals. The by-products of diclofenac, bezafibrate, and carbamazepine were observed in the effluent samples.

Thi Hai Yen Pham, Thi Thu Trang, Hoang Anh Nguyen et al.

Journal of Analytical Methods in Chemistry • 2021

A reduced graphite oxide nanosheet electrode (RGOnS) was prepared as a sensor for amoxicillin (AMX) detection, an antibiotic commonly used in the livestock farm, by the square-wave adsorptive stripping voltammetry technique. Graphite oxide with nanosheet shape was produced from a graphite electrode by a chronoamperometry process at 5 V and then an electrochemical reduction process was carried out to form RGOnS with restored long-range conjugated networks and better conductivity. The electrodes were characterized by SEM, EDX, and FTIR spectroscopy. The RGOnS electrode prepared at an optimal reduction potential of -1 V for 120 s exhibits a larger electrochemical active surface area, and the obtained oxidation signal of AMX is approximately ten times higher than that of the pristine graphite electrode. The analytical conditions such as the pH of electrolyte and accumulation time were optimized. The calibration curve built under the optimal conditions provided a good linear relationship in the range of AMX concentration from 0.5-80 µ M with the correlation coefficient of 0.9992. The limit of detection was calculated as 0.193 µ M. Satisfactory results are obtained from the detection of the AMX in different samples using the prepared electrode.

Barbara Muñoz-Palazón, Aurora Rosa-Masegosa, Miguel Hurtado‐Martínez et al.

Toxics • 2021

Two aerobic granular sludge (AGS) sequential batch reactors were operated at a mild (15 °C) temperature for 180 days. One of those bioreactors was exposed to a mixture of diclofenac, naproxen, trimethoprim, and carbamazepine. The AGS system, operating under pressure from emerging contaminants, showed a decrease in COD, BOD 5 , and TN removal capacity, mainly observed during the first 100 days, in comparison with the removal ratios detected in the control bioreactor. After an acclimatisation period, the removal reached high-quality effluent for COD and TN, close to 95% and 90%, respectively. In the steady-state period, trimethoprim and diclofenac were successfully removed with values around 50%, while carbamazepine and naproxen were more recalcitrant. The dominant bacterial OTUs were affected by the presence of a mixture of pharmaceutical compounds, under which the dominant phylotypes changed to OTUs classified among the Pseudomonas, Gemmobacter , and Comamonadaceae . The RT-qPCR and qPCR results showed the deep effects of pharmaceutical compounds on the number of copies of target genes. Statistical analyses allowed for linking the total and active microbial communities with the physico-chemical performance, describing the effects of pharmaceutical compounds in pollution degradation, as well as the successful adaptation of the system to treat wastewater in the presence of toxic compounds.

Muhammad Shettima Lawan, Rajeev Kumar, Jamshaid Rashid et al.

Water • 2023

The treatment of petroleum refinery wastewater (PRWW) is of great interest in industrial wastewater management. This wastewater contains a diverse concentration of contaminants such as oil and grease, petroleum hydrocarbons, phenols, ammonia, and sulfides, as well as other organic and inorganic composites. Refinery wastewater treatment has been attempted through various processes, including physical, biological, chemical, and hybrid methods, which combine two or more techniques. This review aims to summarize current research studies involved in the treatment of petroleum refinery wastewater using conventional, advanced, and integrated treatment techniques. Furthermore, it critically highlights the efficiencies and major limitations of each technique and the prospects for improvements. Several conventional treatment techniques (basically, the physicochemical and biological processes) are discussed. In this context, advanced oxidation processes (AoPs), especially electrochemical oxidation and photocatalysis, as well as integrated/hybrid processes are found to be effective in removing the recalcitrant fraction of organic pollutants through their various inherent mechanisms. These techniques could effectively remove COD and phenol concentrations with an average removal efficiency exceeding 90%. Hence, the review also presents an elaborate discussion of the photocatalytic process as one of the advanced techniques and highlights some basic concepts to optimize the degradation efficiency of photocatalysts. Finally, a brief recommendation for research prospects is also presented.

Rajasekhar Chokkareddy, Suvardhan Kanchi, Inamuddin Inamuddin

Scientific Reports • 2020

For the first time, we report a novel electrochemical sensor for the simultaneous detection of ethambutol (ETB) and pyrazinamide (PZM) using 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF 4 ]) ionic liquid (IL) assimilated with multiwalled carbon nanotubes (MWCNTs) decorated cobalt ferrite nanoparticles (CoFe 2 O 4 NPs) on the surface of glassy carbon electrode (GCE). The surface morphological and electrochemical properties of the IL@CoFe 2 O 4 NPs@MWCNTs was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR) and cyclic voltammetry (CV), differential pulse voltammetry (DPV) respectively. Moreover, the obtained results of CV demonstrated that the 9-folds enhancement in the electrochemical signals was achieved with IL@CoFe 2 O 4 NPs@MWCNTs@GCE compared to that of a bare GCE. Additionally, the simultaneous electrochemical detection of ETB and PZM was successfully accomplished using IL@CoFe 2 O 4 NPs@MWCNTs over a wide-range of concentration with good limit of detection (3S/m) of 0.0201 and 0.010 μM respectively. The findings of this study identify IL@CoFe 2 O 4 NPs@MWCNTs@GCE has promising abilities of simultaneous detection of ETB and PZM in pharmaceutical formulations.

Oriol Casabella-Font, S. Zahedi, Meritxell Gros et al.

Environmental Pollution • 2023

The effect of graphene oxide on the anaerobic digestion of waste activated sludge was investigated at two graphene oxide concentrations (0.025 and 0.075 g graphene oxide per g volatile solids) using biochemical methane potential tests. The occurrence of 36 pharmaceuticals was monitored in the solid and liquid phases before and after the anaerobic treatment. The addition of graphene oxide improved the removal of most pharmaceuticals detected, even those that are considered persistent to biological degradation, such as azithromycin, carbamazepine, and diclofenac. No significant differences were observed in the final specific methane production without graphene oxide and with the lowest graphene oxide concentration, yet the highest graphene oxide concentration partially inhibited methane production. The relative abundance of antibiotic resistance genes was not affected by the graphene oxide addition. Finally, significant changes in the microbial community including bacteria and archaea were detected with graphene oxide addition.

Xingbiao Wang, Guilong Wan, Liuyang Shi et al.

Environmental Science and Pollution Research • 2019

Bioelectrochemical systems (BESs) have great potential for treating wastewater containing polycyclic aromatic hydrocarbons (PAHs); however, detailed data on cell physiological activities in PAH biodegradation pathways stimulated by BESs are still lacking. In this paper, a novel BES device was assembled to promote the growth of Pseudomonas sp. DGYH-12 in phenanthrene (PHE) degradation. The results showed that in the micro-electric field (0.2 V), cell growth rate and PHE degradation efficiency were 22% and 27.2% higher than biological control without electric stimulation (BC), respectively. The extracellular polymeric substance (EPS) concentration in BES (39.38 mg L -1 ) was higher than control (33.36 mg L -1 ); moreover, the membrane permeability and ATPase activities were also enhanced and there existing phthalic acid and salicylic acid metabolic pathways in the strain. The degradation genes nahAc, pcaH, and xylE expression levels were upregulated by micro-electric stimulation. This is the first study to analyze the physiological and metabolic effect of micro-electric stimulation on a PHE-degrading strain in detail and systematically.

Anna Gielnik, Yoan Péchaud, David Huguenot et al.

International Biodeterioration & Biodegradation • 2019

Robert Kreuzig, Jaqueline Haller-Jans, Cornelia Bischoff et al.

Environmental Science and Pollution Research • 2021

For a novel approach of resource-efficient water reuse, a municipal wastewater treatment plant was extended at pilot scale for advanced wastewater treatment, i.e., ozonation and biological activated carbon filtration, and a hydroponic system for reclaimed water driven lettuce cultivation. The treatment specific wastewater lines with the corresponding lettuce plants, differentiated into roots and shoots, were monitored for priority wastewater micropollutants, i.e., acesulfame (sweetener), caffeine (stimulant), carbamazepine, diclofenac, ibuprofen, sulfamethoxazole with acetyl-sulfamethoxazole (human pharmaceuticals), 1H-benzotriazole, and 4/5-methylbenzotriazole (industrial chemicals). As clearly demonstrated, conventional tertiary treatment could not efficiently clean up wastewater. Removal efficiencies ranged from 3% for carbamazepine to 100% for ibuprofen. The resulting pollution of the hydroponic water lines led to the accumulation of acesulfame, carbamazepine, and diclofenac in lettuce root systems at 32.0, 69.5, and 135 μg kg -1 and in the uptake of acesulfame and carbamazepine into lettuce shoots at 23.4 and 120 μg kg -1 dry weight, respectively. In contrast, both advanced treatment technologies when operating under optimized conditions achieved removal efficiencies of > 90% also for persistent micropollutants. Minimizing the pollution of reclaimed water thus met one relevant need for hydroponic lettuce cultivation.

Hassimi Abu Hasan, Mohd Hafizuddin Muhamad, Setyo Budi Kurniawan et al.

Water • 2023

Increasing levels of bisphenol A (BPA), classified as an endocrine-disrupting compound, in the environment have raised concerns because of its detrimental impact on human and animal health. BPA has been detected in soil and water and even as a volatile compound in the air primarily because of improper disposal and its extensive use in the production of polycarbonate plastics and epoxy resins. This review comprehensively surveyed recent research focusing on the removal of BPA from water through physicochemical and biological treatments, covering articles published from 2002 to 2023. A range of conventional and non-conventional methods employed for BPA removal is examined, and their limitations in completely degrading BPA in water are acknowledged. Hybrid or integrated treatment systems have been explored, capitalising on the distinctive removal potential of various treatment processes. The literature spanning from 2002 to 2023 underscores the efficacy of hybrid or integrated treatment systems in yielding promising results for BPA removal from water. Furthermore, future directions for BPA removal are outlined, and advancements in treatment technologies developed over the past decade are incorporated.

Edward O’Dwyer, Kehua Chen, Hong‐Cheng Wang et al.

Chemical Engineering Journal • 2019

Rusen Zou, Wenqiang Yang, Babak Rezaei et al.

Water Research • 2024

The periodate (PI)-based advanced oxidation process is valued for environmental remediation, but current activation methods involve high costs, secondary contamination risks, and limited applicability due to external energy inputs (e.g., UV), catalyst incorporation (e.g., Fe 2+ ), or environmental modifications (e.g., freezing). In this work, novel bioelectric activation of PI using the electrons generated by electroactive bacteria was developed and investigated for rapid removal of carbamazepine (CBZ), achieving 100 %, 100 %, and 76 % removal efficiency for 4.22 µM of CBZ in 20 min at pH 2, 120 min at pH 6.4, and HRT of 30 min at pH 8.5, respectively, with a 1 mM PI dose and without an input voltage. It was deduced that electrons derived from bacteria could directly activate PI using Ti mesh electrodes and generate •IO 3 via single electron transfer under strongly acidic conditions (e.g., pH 2). Nevertheless, under weak alkaline conditions (e.g., pH 8.5), biogenic electrons indirectly activated PI by generating OH - via 4e - reduction at the Ti mesh cathode, resulting in the formation of •O 2 - and 1 O 2 . In addition to the metal cathode, a carbon-based cathode finely modulates the 2e - reduction, yielding H 2 O 2 and activating PI to mainly form •OH. Moreover, primarily non-toxic IO 3 - was produced during treatment, while no detectable reactive iodine species (HOI, I 2 , and I 3 - ) were observed. Furthermore, the bioelectric activation of PI demonstrated its capability to remove various micropollutants present in secondary-treated municipal wastewater, showcasing its broad-spectrum degradation ability. This study introduces a novel, cost-effective, and environmentally friendly PI activation technique with promising applicability for micropollutant elimination in water treatment.

Ismael Kithinji Kinoti, Esther Muthoni Karanja, Esther Wanja Nthiga et al.

Journal of Chemistry • 2022

Due to rapid industrialization, urbanization, and surge in modern human activities, water contamination is a major threat to humanity globally. Contaminants ranging from organic compounds, dyes, to inorganic heavy metals have been of major concern in recent years. This necessitates the development of affordable water remediation technologies to improve water quality. There is a growing interest in nanotechnology recently because of its application in eco-friendly, cost-effective, and durable material production. This study presents a review of recent nanocomposite technologies based on clay, applied in the removal of heavy metals from wastewater, and highlights the shortcomings of existing methods. Recently published reports, articles, and papers on clay-based nanocomposites for the removal of heavy metals have been reviewed. Currently, the most common methods utilized in the removal of heavy metals are reverse osmosis, electrodialysis, ion exchange, and activated carbon. These methods, however, suffer major shortcomings such as inefficiency when trace amounts of contaminant are involved, uneconomical costs of operation and maintenance, and production of contaminated sludge. The abundance of clay on the Earth’s surface and the ease of modification to improve adsorption capabilities have made it a viable candidate for the synthesis of nanocomposites. Organoclay nanocomposites such as polyacrylamide-bentonite, polyaniline-montmorillonite, and β-cyclodextrin-bentonite have been synthesized for the selective removal of various heavy metals such as Cu2+, Co2+, among others. Bacterial clay nanocomposites such as E. coli kaolinite nanocomposites have also been successfully synthesized and applied in the removal of heavy metals. Low-cost nanocomposites of clay using biopolymers like chitosan and cellulose are especially in demand due to the cumulative abundance of these materials in the environment. A comparative analysis of different synthetic processes to efficiently remove heavy metal contaminants with clay-based nanocomposite adsorbents is made.

Fatemeh Soltani, Nahid Navidjouy, Hassan Khorsandi et al.

RSC Advances • 2021

In this new insight, the potential application of the eco-friendly Bio-Electro-Fenton (BEF) system was surveyed with the aim of simultaneous degradation of tetracycline and in situ generation of renewable bioenergy without the need for an external electricity source. To shed light on this issue, catalytic degradation of tetracycline was directly accrued via in situ generated hydroxyl free radicals from Fenton's reaction in the cathode chamber. Simultaneously, the in situ electricity generation as renewable bioenergy was carried out through microbial activities. The effects of operating parameters, such as electrical circuit conditions (in the absence and presence of external resistor load), substrate concentration (1000, 2000, 5000, and 10 000 mg L -1 ), catholyte pH (3, 5, and 7), and FeSO 4 concentration (2, 5, and 10 mg L -1 ) were investigated in detail. The obtained results indicated that the tetracycline degradation was up to 99.04 ± 0.91% after 24 h under the optimal conditions (short-circuit, pH 3, FeSO 4 concentration of 5 mg L -1 , and substrate concentration of 2000 mg L -1 ). Also, the maximum removal efficiency of anodic COD (85.71 ± 1.81%) was achieved by increasing the substrate concentration up to 2000 mg L -1 . However, the removal efficiencies decreased to 78.29 ± 2.68% with increasing substrate concentration up to 10 000 mg L -1 . Meanwhile, the obtained maximum voltage, current density, and power density were 322 mV, 1195 mA m -2 , and 141.60 mW m -2 , respectively, at the substrate concentration of 10 000 mg L -1 . Present results suggested that the BEF system could be employed as an energy-saving and promising technology for antibiotic-containing wastewater treatment and simultaneous sustainable bioelectricity generation.

Faith Osaretin Osabuohien, Bamidele Samson Omotara, Olusola Ifedolapo Watti

Journal of Frontiers in Multidisciplinary Research • 2021

Mitigating the global challenge of antimicrobial resistance (AMR) requires a multifaceted approach, with increasing attention directed toward environmental contributors such as pharmaceutical effluents. The unchecked discharge of active pharmaceutical ingredients (APIs) from manufacturing plants, healthcare facilities, and post-consumer waste into aquatic environments creates persistent antibiotic residues that exert selective pressure on microbial communities. This process facilitates the evolution and spread of resistant genes, posing a significant threat to public health and ecological integrity. This paper critically reviews adopted chemical and biological methods for controlling pharmaceutical effluents to mitigate AMR and examines their broader implications in environmental chemistry. Chemical treatment methods such as advanced oxidation processes (AOPs), ozonation, and chlorination have demonstrated high efficiency in degrading complex pharmaceutical compounds. However, these methods often generate toxic by-products and require high operational costs and energy input, raising concerns about sustainability and secondary pollution. On the other hand, biological methods—particularly activated sludge systems, constructed wetlands, and enzymatic treatments—offer eco-friendly alternatives capable of biodegrading pharmaceutical residues under controlled conditions. These systems leverage microbial metabolism and plant-microbe interactions to reduce pollutant load, although their effectiveness can be influenced by environmental factors and the chemical structure of target compounds. The global environmental chemistry implications of these approaches are profound. While chemical treatments may alter the speciation and mobility of pharmaceutical residues, biological methods influence nutrient cycling, microbial diversity, and ecological resilience. Understanding the environmental fate and transformation pathways of pharmaceuticals and their metabolites is crucial for evaluating treatment efficacy and minimizing unintended consequences. Furthermore, integrating these treatment strategies with regulatory frameworks and real-time monitoring tools can significantly enhance risk mitigation, especially in low- and middle-income countries where effluent management is often inadequate. In conclusion, effective pharmaceutical effluent control through tailored chemical and biological methods is pivotal to addressing AMR. A comprehensive approach that combines scientific innovation, environmental monitoring, and global policy alignment is essential to safeguard ecosystems and human health from the escalating threat of antibiotic resistance.

Till Tiso, Philipp Demling, Tobias Karmainski et al.

Discover Chemical Engineering • 2024

Abstract Foam formation is a massive challenge in submerged aerated bioprocesses, e.g., in beer fermentation. While the use of antifoam may easily overcome foaming at laboratory scale, it is often an unattractive solution since the challenge remains in future upscaling, as reduced mass transfer and extra steps in product purification and analytics result in increased costs. Interestingly, the number of studies tackling this challenge is relatively low, although literature suggests a range of alternatives, from avoiding foaming to means of controlling or even using foaming as an in situ product removal. Here we give an overview of the topic in five subsections. (1) We argue that a sound understanding of the molecular origin of foaming can facilitate solutions for overcoming the challenge while introducing some long-known challenges (i.e., in beer fermentation). We then review in (2) the apparent avoidance of foam formation before we in (3) summarize possibilities to reduce and control foam after its formation. Subsequently, in (4), we discuss possible solutions that take advantage of foam formation, for example, via foam fractionation for in situ product removal. Finally, in (5), we provide an overview of microbial strain engineering approaches to cope with some aspects of foaming in fermentations. With this review, we would like to sensitize and inform the interested reader while offering an overview of the current literature for the expert, particularly with regard to the foam special issue in Discover Chemical Engineering.

Shu-Yuan Pan, Seth W. Snyder, Yupo J. Lin et al.

Environmental Science Water Research & Technology • 2018

This article presents the challenges and opportunities of electrokinetic desalination for brackish water and its recent development and prospective.

Tamara Alomar, B.H. Hameed, Mohammed Awwalu Usman et al.

Journal of Water Process Engineering • 2022

The handling and treatment of produced water (PW) generated during oil and gas extraction has continued to be a serious dilemma due to its large quantities and complex composition with variety of pollutants. In this review article, the treatment of PW using adsorption and advanced oxidation processes (AOP) and their integrated processes is analyzed and discussed, where the PW sources studied were both real and artificially contaminated PW. The role of different reaction parameters and their effect on the performance of these processes is critically evaluated. Furthermore, the existing research gaps were identified where it was found that there are insufficient studies on the integration of adsorption and advanced oxidation processes, but with the available literature, it was shown that integrated adsorption-advanced oxidation processes could be effectively used to treat produced water. It was deduced that further studies should target continuous columns (packed bed) rather than batch systems. Moreover, cost analysis and comparison should be carried out to see the feasibility of these systems. Also, innovative integrated technologies and efficient methods for the regeneration and reuse of these systems should be studied for their upscaling to industrial-scale applications.

Bishwambhar Mishra, Sunita Varjani, Ipshita Pradhan et al.

Proceedings of the National Academy of Sciences India Section B Biological Sciences • 2020

Modern industrialization has originated a tremendous industrial growth. Discharge of industrial effluent is a critical threat to a safe environment. Removal of various pollutants from industrial wastewater is obligatory for controlling environmental pollution. Bioremediation using biotechnological interventions has attracted greater attention among the researchers in the field of control and abatement of environmental pollution. This review is aimed to introduce methods for bioremediation on the removal of organic pollutants from industrial wastewater that have been discussed, and the kinetic models that are related to it have been introduced. In addition, biotechnological interventions on bioremediation of pollutants have been discussed fingerprinting of microbial sp. present at polluted sites. Microbial electrochemical technologies such as a green technology for the removal of pollutants from industrial effluents and simultaneous resource recovery from industrial waste have been discussed to generate up-to-date scientific literature. This review also provides detailed knowledge gaps, challenges and research perspectives related to the topic.

Andrea G. Capodaglio

Water • 2023

The disposal of excess biological sewage sludge from wastewater treatment is a growing environmental issue due to the vast quantities generated worldwide. For many years, sludge disposal has been considered an inevitable “nuisance” linked to the main task of wastewater treatment; recently, the issues relating to the presence of emerging pollutants in sludge have contributed to severe limitations on traditional disposal routes and increased process costs. As a consequence of the water industry’s approach to sustainability and circular economy principles, the investigation into options for sludge-embedded resource recovery has been increasing over time. Among these, the definition of biorefinery encompasses many processes used to process sewage sludge for biofuel and/or resource recovery. In addition to the “conventional” recovery of biogas and nutrients, biopolymers (PHAs and EPS), proteins, enzymes, biopesticides, and biofuels are among the “new” sludge extraction products that are being studied. Not all of the proposed technologies are, however, mature for industrial exploitation as yet. This paper presents an overview of possible product recovery from sludge biorefinery, with emphasis on recent developments, and on the benefits and limitations of applicable technologies for ensuring sustainability and environmental efficiency, through an analysis of the current literature.

Joanna Boguniewicz-Zabłocka, Iwona Kłosok-Bazan, Andrea G. Capodaglio

Environmental Science and Pollution Research • 2020

The issue of sustainable management of biosolids (excess sludge) from wastewater treatment is an important issue in the entire developed world. Residual sludge disposal costs and environmental impact may be significant, and reducing such costs, as well as the energy consumption for dewatering and drying, is a key issue for safe and sustainable sludge disposal, considering the recent ban of some disposal options, such as landfilling, in many European countries. An alternative to thermal technologies is solar drying (not to be confused with bio-drying, very close to the concept of composting). Solar greenhouse drying technology is characterized by reduced land requirements compared with traditional outdoor drying beds, as well as by low-energy requirements compared with other thermal drying methods. Process operation is cost-efficient, with close to no maintenance, and observed specific evaporation rates up to threefold higher than conventional drying beds. Many applications of this technology exist in Poland, Germany and Austria: more than 10,000 t of wet sludge per year is treated in this way in Germany alone and almost as many (9000 t/year) in Poland. This paper examines current biosolids treatment technologies applicable to small wastewater treatment plants (2000-9999 population equivalents served) and opportunities for possible solids reuse in Poland in view of sustainable circular economy schemes. In particular, a purely solar-driven greenhouse facility for sewage sludge drying was investigated under different conditions (season, temperature, environmental humidity) and possible improvements for its efficiency evaluated. Sludge processed by solar drying could have different final disposal pathways, according to season, in accordance with the prescriptions of the new National Waste Management Plan of Poland.

Shima Momeni, Davood Nematollahi

Scientific Reports • 2017

Electrochemical behavior of acid orange 7 has been exhaustively studied in aqueous solutions with different pH values, using cyclic voltammetry and constant current coulometry. This study has provided new insights into the mechanistic details, pH dependence and intermediate structure of both electrochemical oxidation and reduction of acid orange 7. Surprisingly, the results indicate that a same redox couple (1-iminonaphthalen-2(1H)-one/1-aminonaphthalen-2-ol) is formed from both oxidation and reduction of acid orange 7. Also, an additional purpose of this work is electrochemical synthesis of three new derivatives of 1-amino-4-(phenylsulfonyl)naphthalen-2-ol (3a-3c) under constant current electrolysis via electrochemical oxidation (and reduction) of acid orange 7 in the presence of arylsulfinic acids as nucleophiles. The results indicate that the electrogenerated 1-iminonaphthalen-2(1 H)-one participates in Michael addition reaction with arylsulfinic acids to form the 1-amino-3-(phenylsulfonyl)naphthalen-2-ol derivatives. The synthesis was carried out in an undivided cell equipped with carbon rods as an anode and cathode.

Thiago Castanho Pereira, Érico M.M. Flores, Anna V. Abramova et al.

Ultrasonics Sonochemistry • 2023

In this study, a novel hydrodynamic cavitation unit combined with a glow plasma discharge system (HC-GPD) was proposed for the degradation of pharmaceutical compounds in drinking water. Metronidazole (MNZ), a commonly used broad-spectrum antibiotic, was selected to demonstrate the potential of the proposed system. Cavitation bubbles generated by hydrodynamic cavitation (HC) can provide a pathway for charge conduction during glow plasma discharge (GPD). The synergistic effect between HC and GPD promotes the production of hydroxyl radicals, emission of UV light, and shock waves for MNZ degradation. Sonochemical dosimetry provided information on the enhanced formation of hydroxyl radicals during glow plasma discharge compared to hydrodynamic cavitation alone. Experimental results showed a MNZ degradation of 14% in 15 min for the HC alone (solution initially containing 300 × 10 -6 mol L -1 MNZ). In experiments with the HC-GPD system, MNZ degradation of 90% in 15 min was detected. No significant differences were observed in MNZ degradation in acidic and alkaline solutions. MNZ degradation was also studied in the presence of inorganic anions. Experimental results showed that the system is suitable for the treatment of solutions with conductivity up to 1500 × 10 -6 S cm -1 . The results of sonochemical dosimetry showed the formation of oxidant species of 0.15 × 10 -3 mol H 2 O 2 L -1 in the HC system after 15 min. For the HC-GPD system, the concentration of oxidant species after 15 min reached 13 × 10 -3 molH 2 O 2 L -1 . Based on these results, the potential of combining HC and GPD systems for water treatment was demonstrated. The present work provided useful information on the synergistic effect between hydrodynamic cavitation and glow plasma discharge and their application for the degradation of antibiotics in drinking water.

Zhenyao Wang, Xuan Li, Huan Liu et al.

Critical Reviews in Environmental Science and Technology • 2024

Triclosan (TCS) is an anti-microbial widely used in personal care and medical antibacterial products. Despite the widespread occurrence of TCS in municipal sewage sludge, understanding toward the fate of TCS within sewage treatment and environmental risks in the eventual land application is still limited. This review summarizes the TCS loads and transfer mechanisms in the sewage treatment process, sludge management process, land application, and its potential environmental impacts. TCS transfer from sewage to sludge mainly occurs in the primary sedimentation process, representing 2.50 to 4.58 times more compared to the secondary sedimentation process. This transfer is facilitated through adsorption because of the presence of humic acid-like and protein-like substances in sludge. Both anaerobic digestion and aerobic composting contribute to the degradation of TCS with aerobic composting being more effective, exhibiting TCS degradation rates 1.04–2.87 times higher than those observed in anaerobic digestion. After sludge land application, TCS majorly dissipates in the soil through biodegradation by fungi and bacteria, potentially posing environmental risks, such as inhibiting the seedling growth of plant species. Additionally, the degradation of TCS, coupled with the formation and subsequent degradation of MeTCS, is observed, with MeTCS exhibiting a higher half-life and greater toxicity than its parent compound (TCS). Overall, this research offers vital insights to enhance understanding of TCS’s migration and degradation processes in sewage treatment and soil. It also provides guidance in environmental protection and sustainable resource management. © 2024 the Author(s).

Chao Mai, Amin Mojiri, Swaminathan Palanisami et al.

Water • 2023

As the global population reaches eight billion, large quantities of wastewater (domestic, industrial, livestock) need to be treated in an efficient, green, and environmentally friendly manner. Wastewater hydroponics technology (HP) can efficiently remove various pollutants (conventional and emerging pollutants, heavy metals, and microorganisms) and create economic benefits. This paper aims to systematically review the principles, applications, and limitations of wastewater hydroponics technology in the context of pollution and nutrient removal. Unlike constructed wetlands, wastewater hydroponics has been proven to be effective in removing pollutants through small-scale in situ restoration. For instance, the average removal of COD, total nitrogen (TN), total phosphorus (TP), copper (Cu), and zinc (Zn) was more than 70%, 60%, 80%, 64.2%, and 49.5%, respectively. However, HP technology still has the disadvantages of high energy consumption, complex control parameters, and low public acceptance of using wastewater for planting crops. Therefore, further research is needed to reduce system energy consumption. In addition, hybrid technologies, such as two-stage hydroponics that use aquatic plants (algae or aquatic floating weeds) to recycle pollutant-containing wastewater nutrients for hydroponics, should be further developed.

Paula Andrea Peña Hernández, Miaomiao Zhou, Igor Vassilev et al.

ACS Omega • 2021

Carboxylic acids obtained via the microbial electrochemical conversion of waste gases containing carbon dioxide ( i.e. , microbial electrosynthesis) can be used in lieu of nonrenewable building-block chemicals in the manufacture of a variety of products. When targeting valuable medium-chain carboxylic acids such as caproic acid, electricity-driven fermentations can be limited by the accumulation of fermentation products in the culturing media, often resulting in low volumetric productivities and titers due to direct toxicity or inhibition of the biocatalyst. In this study, we tested the effectiveness of a simple electrodialysis system in upconcentrating carboxylic acids from a model solution mimicking the effluent of a microbial electrochemical system producing short- and medium-chain carboxylic acids. Under batch extraction conditions, the electrodialysis scheme enabled the recovery of 60% (mol mol -1 ) of the total carboxylic acids present in the model fermentation broth. The particular arrangement of conventional monopolar ion exchange membranes and hydraulic recirculation loops allowed the progressive acidification of the extraction solution, enabling phase separation of caproic acid as an immiscible oil with 76% purity.

Wei Dai, Ji-Wei Pang, Jie Ding et al.

Frontiers in Microbiology • 2023

This study provides feasible design alternatives for PWWTPs to remove both toxic and conventional pollutants at the same time.

Joanna Lach, Agnieszka Ociepa-Kubicka, M. Mrowiec

Energies • 2021

The aim of the work was to evaluate the possibility of using commercial and modified activated carbons for the removal of oxytetracycline from aqueous solutions. The kinetics and statics of adsorption as well as the effect of the activated carbon dose and solution pH on the efficiency of the oxytetracycline adsorption were analyzed. Based on the study of oxytetracycline adsorption isotherms, the activated carbons were ranked in the following order: F-300 > WG-12 > Picabiol > ROW08 > WACC 8 × 30 > F-100 > WAZ 0.6–2.4. The most effective activated carbons were characterized by large specific surfaces. The best matching results were obtained for: Redlich–Peterson, Thot and Jovanovic models, and lower for the most frequently used Freundlich and Langmuir models. The adsorption proceeded better from solutions with pH = 6 than with pH = 3 and 10. Two ways of modifying activated carbon were also assessed. A proprietary method of activated carbon modification was proposed. It uses the heating of activated carbon as a result of current flow through its bed. Both carbons modified at 400 °C in the rotary kiln and on the proprietary SEOW (Joule-heat) modification stand enabled to obtain adsorbents with higher and comparable monolayer capacities. The advantage of the proposed modification method is low electricity consumption.

Waleska Stephanie da Cruz Nizer, Madison Elisabeth Adams, Kira Noelle Allison et al.

Biofilm • 2024

Oxidizing agents are low-molecular-weight molecules that oxidize other substances by accepting electrons from them. They include reactive oxygen species (ROS), such as superoxide anions (O 2 - ), hydrogen peroxide (H 2 O 2 ), and hydroxyl radicals (HO - ), and reactive chlorine species (RCS) including sodium hypochlorite (NaOCl) and its active ingredient hypochlorous acid (HOCl), and chloramines. Bacteria encounter oxidizing agents in many different environments and from diverse sources. Among them, they can be produced endogenously by aerobic respiration or exogenously by the use of disinfectants and cleaning agents, as well as by the mammalian immune system. Furthermore, human activities like industrial effluent pollution, agricultural runoff, and environmental activities like volcanic eruptions and photosynthesis are also sources of oxidants. Despite their antimicrobial effects, bacteria have developed many mechanisms to resist the damage caused by these toxic molecules. Previous research has demonstrated that growing as a biofilm particularly enhances bacterial survival against oxidizing agents. This review aims to summarize the current knowledge on the resistance mechanisms employed by bacterial biofilms against ROS and RCS, focussing on the most important mechanisms, including the formation of biofilms in response to oxidative stressors, the biofilm matrix as a protective barrier, the importance of detoxifying enzymes, and increased protection within multi-species biofilm communities. Understanding the complexity of bacterial responses against oxidative stress will provide valuable insights for potential therapeutic interventions and biofilm control strategies in diverse bacterial species.

Edris Hoseinzadeh, Chiang Wei, Mahdi Farzadkia et al.

Frontiers in Bioengineering and Biotechnology • 2020

Bioelectrochemical systems have undergone several modifications to promote the enzymes or pathways used to reduce the energy required for microbial metabolism. Changes in dominant bacteria, population, and growth rates occur when an electric current is applied intermittently. Applying electricity to bioelectrical reactor (BER) biofilms can either stimulate cells or lead to cell death; therefore, determining the applied voltage range that leads to viable and stimulated bacteria is crucial. We investigated the progression of apoptosis induced by a low frequency-low voltage alternating electric current (AC) in a BER biofilm and found that biofilms on carbon cloth (CC) and stainless steel (SS) 304 electrodes had pH zpc values of 8.67. The pH zpc of the biofilms increased by two compared to that of the inoculant bacteria mass. Furthermore, the Henderson-Hasselbalch equation reveals that the compositions of cell walls of the biofilms that formed on the CC and SS304 electrodes are very similar. In contrast, the CC and SS304 biofilms differ from the inoculant biomass without the influence of an AC field; this indicates that there are differences in the compositions of the cell walls in the present bacteria. Fourier transform infrared spectroscopy was used to compare spectra of the biofilms with that of the inoculation mass, and there were differences in shape and absorbance intensity, indicating variability in the composition, and quantity of each individual biofilm component. In addition, the dehydrogenase activity (DHA) content varied under different applied voltages; the highest DHA was obtained at 8 Vpp. A flow cytometry analysis showed a relatively low number of apoptotic cells (10.93 ± 5.19%) for the AC amplitudes studied. Thus, a low voltage-low frequency AC likely induces significant changes in bacterial metabolic activity but causes no significant change in their viability.

Pinelopi Savvidou, Gabriela Dotro, Pablo Campo et al.

The Science of The Total Environment • 2024

Per- and poly-fluoroalkyl substances (PFAS) have emerged as newly regulated micropollutants, characterised by extreme recalcitrance and environmental toxicity. Constructed wetlands (CWs), as a nature-based solution, have gained widespread application in sustainable water and wastewater treatment and offer multiple environmental and societal benefits. Despite CWs potential, knowledge gaps persist in their PFAS removal capacities, associated mechanisms, and modelling of PFAS fate. This study carried out a systematic literature review, supplemented by unpublished experimental data, demonstrating the promise of CWs for PFAS removal from the influents of varying sources and characteristics. Median removal performances of 64, 46, and 0 % were observed in five free water surface (FWS), four horizontal subsurface flow (HF), and 18 vertical flow (VF) wetlands, respectively. PFAS adsorption by the substrate or plant root/rhizosphere was deemed as a key removal mechanism. Nevertheless, the available dataset resulted unsuitable for a quantitative analysis. Data-driven models, including multiple regression models and machine learning-based Artificial Neural Networks (ANN), were employed to predict PFAS removal. These models showed better predictive performance compared to various mechanistic models, which include two adsorption isotherms. The results affirmed that artificial intelligence is an efficient tool for modelling the removal of emerging contaminants with limited knowledge of chemical properties. In summary, this study consolidated evidence supporting the use of CWs for mitigating new legacy PFAS contaminants. Further research, especially long-term monitoring of full-scale CWs treating real wastewater, is crucial to obtain additional data for model development and validation.

Muhammad Syaamil Saad, Lila Balasubramaniam, Mohd Dzul Hakim Wirzal et al.

Membranes • 2020

The textile industry provides for the needs of people especially in apparel and household items. The industry also discharges dye-containing wastewater that is typically challenging to treat. Despite the application of the biological and chemical treatments for the treatment of textile wastewater, these methods have their own drawbacks such as non-environment friendly, high cost and energy intensive. This research investigates the efficiency of the celestine blue dye removal from simulated textile wastewater by electrocoagulation (EC) method using iron (Fe) electrodes through an electrolytic cell, integrated with nylon 6,6 nanofiber (NF) membrane filtration for the separation of the flocculants from aqueous water. Based on the results, the integrated system achieves a high dye removal efficiency of 79.4%, by using 1000 ppm of sodium chloride as the electrolyte and 2 V of voltage at a constant pH of 7 and 10 ppm celestine blue dye solution, compared to the standalone EC method in which only 43.2% removal was achieved. Atomic absorption spectroscopy analysis was used to identify the traces of iron in the residual EC solution confirming the absence of iron. The EC-integrated membrane system thus shows superior performance compared to the conventional method whereby an additional 10-30% of dye was removed at 1 V and 2 V using similar energy consumptions.

Ke Li, Nicholas Miwornunyuie, Lei Chen et al.

Sustainability • 2021

Water is life, and clean-water demand is increasing daily as a result of rapid population growth and industrial evolution. Nevertheless, due to the inadequate supply and availability of new water sources, there is a need for effective, sustainable removal of contaminants for wastewater reuse. Several treatment approaches that include chemical, physical, and biological methods have been thoroughly tested, with biological treatment being regarded as the most cost-effective and environmentally friendly method. However, the presence of heavy metals and complicated chemicals that are nonbiodegradable limits the use of this cost-effective approach. In this paper, we review the sustainable application of a cheap, water-stable metal-organic framework, the zeolitic imidazolate framework (ZIF-8), with an easier synthesis approach for heavy-metal removal in aqueous solutions. In this review, we discuss the removal efficiency in terms of adsorption capacity, describe the underlying mechanism behind the adsorption capacity of ZIF-8, present a sustainable synthesis approach, and make vital suggestions to aid in the future application of ZIF-8 for the removal of heavy metals.

Wei Gao, Mingxuan Xu, Wanqi Zhao et al.

Fermentation • 2024

Plastic wastes, widely distributed in the environment, can be transformed into microplastics, posing a huge threat to ecosystems and human health due to their stability and adsorbability to other toxic pollutants (e.g., heavy metals and antibiotics). Recently, microbial degradation of (micro)plastics has gained widespread attention because of its green and sustainable properties. Microbial degradation of (micro)plastics is based on the cascade effects of various enzymes secreted by microorganisms, which can convert (micro)plastics into oligomers and monomers, or even mineralize them into CO2 and H2O. The microbial degradation of (micro)plastics is affected by multiple factors, such as microbial species, plastic properties, and environmental conditions. Currently, limited efficient plastic-degrading microorganisms have been discovered, and their degradation mechanisms are still unclear. Furthermore, the efficiency of microbial degradation needs to be improved for future application. Therefore, this review systematically summarizes the sources and properties of existing plastics, identifies pure cultures and mixed cultures for plastic degradation, and examines their influencing factors. In particular, the microbial degradation behaviors of (micro)plastics, including relevant enzymes, degradation efficiency, and degradation mechanisms, were thoroughly discussed. Additionally, the augmentation technologies coupling with microbial degradation, such as advanced oxidation, electrochemical, and genetic engineering technologies, were introduced and highlighted for their potential prospects. This review provides a reference for future research and development of (micro)plastic biodegradation technology.

Vasileios A. Tzanakakis, Andrea G. Capodaglio, Andreas N. Angelakιs

Sustainability • 2023

The growing population, intensified anthropogenic pressures and climate variability have increased the demands on available water resources, and water reuse has become a high priority, particularly in areas of the world suffering from water stress. The main objectives of this review paper are to consider and identify the potential opportunities and challenges in the implementation of water reuse schemes worldwide by considering and analyzing different fields of interest in water reuse, the current and future global drivers of water reuse policies, the existing advances in treatment and reuse technologies promising elimination of environmental footprint and human health risk, an analysis of the trends in potable and non-potable reuse, and the development of quality criteria and issues related to transition circular economy. Moreover, the major knowledge gaps in critical issues on different domains of water reuse schemes are discussed. For this study, a thorough analysis of the current literature was conducted, using research and review articles, technical reports, specific national (and EU) proposals, guidance documents, and legislative initiatives and actions, as well as any validly disseminated findings by scientists around the world in the wider scientific area of (alternative) water resources, water supply, water management, sustainable development, and protection of public health. Water reuse practices are expected to increase in the future, mainly in developed countries and climate-vulnerable areas of the planet. Current advances in wastewater treatment and water reuse technologies can provide the opportunity for the foul exploitation of alternative water resources, increasing the potential of potable and non-potable water reuse systems worldwide, relying on pollutant/contaminant elimination, and improving economic and energy performances. Moreover, paradigmatic and technological switches based on an improved understanding of the relationships between the water cycle and the Water–Energy–Food (WEF) Nexus will increase the perspective of water reuse schemes. The benefits of the recovery of nutrients through sewage wastewater treatment are also highlighted, arising from reduced costs associated with their sheer removal and the supplement of fertilizers to the WEF Nexus. On the other hand, reduced nutrient removal may promote agricultural or landscape reuse practices, contributing to less energy consumption and reducing GHGs emissions. Regarding the management of water use schemes, a holistic approach (integrated management) is proposed, incorporating regulatory actions, actions increasing public awareness, interconnection among actors/stakeholders, and efficient control and monitoring. The establishment of quality criteria is paramount to preventing undesirable impacts on humans and the environment. The study considers the “one water” concept, which means equal water quality criteria independent of the origin of water, and instead differentiates among different types of water reuse as a means to facilitate implementation and management of potable and non-potable water reuse. Finally, it highlights the need to understand the impacts of water reuse systems on ecosystem services (ESs) and the consequences of achieving the global sustainable development goals (SDGs).

Guan Wang, Kai Tang, Yufeng Jiang et al.

Bioresource Technology • 2020

Joyabrata Mal, Wouter J. Veneman, Y.V. Nancharaiah et al.

Nanotoxicology • 2016

Microbial reduction of selenium (Se) oxyanions to elemental Se is a promising technology for bioremediation and treatment of Se wastewaters. But a fraction of biogenic nano-Selenium (nano-Se b ) formed in bioreactors remains suspended in the treated waters, thus entering the aquatic environment. The present study investigated the toxicity of nano-Se b formed by anaerobic granular sludge biofilms on zebrafish embryos in comparison with selenite and chemogenic nano-Se (nano-Se c ). The nano-Se b formed by granular sludge biofilms showed a LC 50 value of 1.77 mg/L, which was 3.2-fold less toxic to zebrafish embryos than selenite (LC 50 = 0.55 mg/L) and 10-fold less toxic than bovine serum albumin stabilized nano-Se c (LC 50 = 0.16 mg/L). Smaller (nano-Se cs ; particle diameter range: 25-80 nm) and larger (nano-Se cl ; particle diameter range: 50-250 nm) sized chemically synthesized nano-Se c particles showed comparable toxicity on zebrafish embryos. The lower toxicity of nano-Se b in comparison with nano-Se c was analyzed in terms of the stabilizing organic layer. The results confirmed that the organic layer extracted from the nano-Se b consisted of components of the extracellular polymeric substances (EPS) matrix, which govern the physiochemical stability and surface properties like ζ-potential of nano-Se b . Based on the data, it is contented that the presence of humic acid like substances of EPS on the surface of nano-Se b plays a major role in lowering the bioavailability (uptake) and toxicity of nano-Se b by decreasing the interactions between nanoparticles and embryos.

Marco Hartl, María Jesús García-Galán, Víctor Matamoros et al.

Chemosphere • 2021

Guangwei Yan, Yingjun Gao, Kun Xue et al.

Frontiers in Environmental Science • 2023

Chromium (Cr) is the seventh most abundant chemical element in the Earth’s crust, and Cr(III) and Cr(VI) are common stable valence states of Cr. Several Cr-containing substances, such as FeOCr 2 O 3 and stainless-steel products, exist in nature and in life. However, Cr(VI) is toxic to soil, microorganisms, and plants and poses a serious threat to human health through direct and indirect exposure. By collecting published journal literature, we found that Cr(VI) can cause acute and chronic toxicity in organisms and has carcinogenic effects, and the mechanisms causing these toxicity include endoplasmic reticulum stress, autophagy and apoptosis. However, the relationship between these mechanisms remains unclear. Many methods have been researched to purify chromium, but each of these methods has its own advantages and disadvantages. Therefore, this review summarizes the hazards of chromium and the mechanisms of chromium toxicity after entering cells and provides a number of methods for chromium contamination management, providing a direction for the next step in chromium toxicology and contamination decontamination research.