[object Object], [object Object], [object Object] et al.

Scientific Reports • 2015

This study investigated the interaction of the macrophyte Acorus calamus and sediment microbial fuel cells (SMFC) during the degradation of high molecular weight-polycyclic aromatic hydrocarbons (HMW-PAHs) in sediments. Over 367-days, the combination of macrophyte and SMFC led to an increase in pyrene and benzo[a]pyrene degradation rates by at least 70% compared to SMFC or macrophyte alone. While either the macrophyte or SMFC increased redox potential in sediments, redox potentials near the anode (approximately 6 cm depth) in the macrophyte-SMFC combination were markedly lower than that in the only macrophyte treatment. Moreover, rhizospheric bacterial communities in macrophyte-SMFC and macrophyte treatments were distinctly different. Aerobic genera (Vogesella, Pseudomonas, Flavobacterium and Rhizobium) and anaerobic genera (Longilinea, Bellilinea, Desulfobacca and Anaeromyxobacter) became dominant in the rhizosphere in macrophyte and macrophyte-SMFC treatments, respectively. In addition, the macrophyte-SMFC combination improved the numbers of not only aerobic but anaerobic PAHs degraders in sediments. So, the SMFC employment facilitated the formation of anoxic zones in sediments with oxygen loss and exudates from the roots. As a result, cooperation of anaerobic/aerobic microbial metabolism for accelerating HMW-PAHs removal occurred within sediments after combining macrophytes with SMFC.

[object Object], [object Object], [object Object] et al.

Process Biochemistry • 2018

[object Object], [object Object]

Membranes • 2020

In the context of preserving and improving human health, electrodialytic processes are very promising perspectives. Indeed, they allow the treatment of water, preservation of food products, production of bioactive compounds, extraction of organic acids, and recovery of energy from natural and wastewaters without major environmental impact. Hence, the aim of the present review is to give a global portrait of the most recent developments in electrodialytic membrane phenomena and their uses in sustainable strategies. It has appeared that new knowledge on pulsed electric fields, electroconvective vortices, overlimiting conditions and reversal modes as well as recent demonstrations of their applications are currently boosting the interest for electrodialytic processes. However, the hurdles are still high when dealing with scale-ups and real-life conditions. Furthermore, looking at the recent research trends, potable water and wastewater treatment as well as the production of value-added bioactive products in a circular economy will probably be the main applications to be developed and improved. All these processes, taking into account their principles and specificities, can be used for specific eco-efficient applications. However, to prove the sustainability of such process strategies, more life cycle assessments will be necessary to convince people of the merits of coupling these technologies.

[object Object], [object Object], [object Object] et al.

Environmental Science and Ecotechnology • 2023

-based materials and guiding the development of efficient photocatalysts.

[object Object], [object Object], [object Object] et al.

Advanced Composites and Hybrid Materials • 2023

Abstract Additive manufacturing (AM) also known as 3D printing (3DP) has become a popular technology with a wide range of applications, from which vat photopolymerization is a technique for producing nanocomposites with controlled mechanical, thermal, and electrical properties. This technology uses a UV light laser to cure a liquid resin into a solid object, layer by layer, allowing complex three-dimensional (3D) objects with intricate details of manufacturing and excellent finishing. Nanocomposites produced by vat photopolymerization have been used in aerospace, automotive, and medical industries, due to their superior mechanical strength and dimensional accuracy. In this article, we will discuss the advantages and other aspects of nanocomposites made with vat photopolymerization, exploring potential applications, and discuss the research by different areas, such as their AM technologies and materials properties. Graphical abstract This review deals with nanocomposites made by additive manufacturing (3D printing), presenting a systematic on vat photopolymerization technology, including the technologies, materials, and properties.

[object Object], [object Object], [object Object] et al.

ACS Catalysis • 2021

Seawater electrolysis is an attractive approach for producing clean hydrogen fuel in scenarios where freshwater is scarce and renewable electricity is abundant. However, chloride ions (Cl–) in seawater can accelerate electrode corrosion and participate in the undesirable chlorine evolution reaction (CER). This problem is especially acute in acidic conditions that naturally arise at the anode as a result of the desired oxygen evolution reaction (OER). Herein, we demonstrate that ultrathin silicon oxide (SiOx) overlayers on model platinum anodes are highly effective at suppressing the CER in the presence of 0.6 M Cl– in both acidic and unbuffered pH-neutral electrolytes by blocking the transport of Cl– to the catalytically active buried interface while allowing the desired oxygen evolution reaction (OER) to occur there. The permeability of Cl– in SiOx overlayers is 3 orders of magnitude less than that of Cl– in a conventional salt-selective membrane used in reverse osmosis desalination. The overlayers also exhibit robust stability over 12 h in chronoamperometry tests at moderate overpotentials. SiOx overlayers demonstrate a promising step toward achieving selective and stable seawater electrolysis without the need to adjust the pH of the electrolyte.

[object Object], [object Object], [object Object] et al.

Water Environment Research • 2019

Worldwide waste generation has become a topic of interest since the accumulation of this waste has prompted environmental hazards. Among which, anaerobic digestion provides green and efficient alternate solution for removal of toxic waste and energy production. Therefore, this review emphasizes on the recent data published in 2018 on topics related to anaerobic process, enhancement of biogas production, and fermentation efficiency. Furthermore, more focus was made on the factors influencing anaerobic digestion and the effect of trace elements as ionic salts as well as nanoparticles on overall biogas production, respectively. PRACTITIONER POINTS: Anaerobic digestion provide green and efficient alternate solution to deal with. This review focused on the conditions related to anaerobic process to improve biogas production and fermentation efficiency. The trace elements were focused on how to influence biogas production during anaerobic digestion.

[object Object]

Food Security • 2019

Edible microbial biomass derived from bacteria, yeasts, filamentous fungi or microalgae is a promising alternative to conventional sources of food and feed. Microorganisms are a good source of protein, vitamins and, in some cases, also contain beneficial lipids. The ability of microorganisms to use simple organic substrates for growth permits industrial-scale cultivation of edible microbial biomass in geographical locations that would not compete with agricultural production. Only a handful of microbial products are currently available for human consumption. The use of microbial biomass for animal feed is limited by access to low-cost growth substrates and competition from conventional feed sources such as soy and fishmeal. At a time when the global food production system is threatened by the effects of climate change, the production of edible microorganisms has the potential to circumvent many of the current environmental boundaries of food production as well as reducing its environmental impact. Photosynthetic microorganisms such as cyanobacteria and microalgae can be cultivated for food and feed independently of arable land. In addition, recent technological developments in atmospheric carbon dioxide (CO2) capture, extraction and catalytic conversion into simple organic compounds can be used for cultivation of edible microbial biomass for food and feed in a manner that is wholly independent of photosynthesis. The future possibilities, challenges and risks of scaled-up production of edible microbial biomass in relation to the global food system and the environment are discussed.

[object Object], [object Object], [object Object]

ChemBioEng Reviews • 2019

Abstract Renewable methanol production is an emerging technology that bridges the gap in the shift from fossil fuel to renewable energy. Two thirds of the global emission of CO 2 stems from humanity's increasing energy need from fossil fuels. Renewable energy, mainly from solar and wind energy, suffers from supply intermittency, which current grid infrastructures cannot accommodate. Excess renewable energy can be harnessed to power the electrolysis of water to produce hydrogen, which can be used in the catalytic hydrogenation of waste CO 2 to produce renewable methanol. This review considers methanol production in the current context, regionally for Europe, which is dominated by Germany, and globally by China. Appropriate carbon‐based feedstock for renewable methanol production is considered, as well as state‐of‐the‐art renewable hydrogen production technologies. The economics of renewable methanol production necessitates the consideration of regionally relevant methanol derivatives. The thermodynamics, kinetics, catalytic reaction mechanism, operating conditions and reactor design are reviewed in the context of renewable methanol production to reveal the most up to date understanding.

[object Object], [object Object], [object Object] et al.

Water Research • 2015

[object Object], [object Object]

Bioresource Technology • 2019

[object Object], [object Object], [object Object] et al.

Water Research • 2023

[object Object], [object Object], [object Object] et al.

Bioresource Technology • 2019

[object Object], [object Object], [object Object] et al.

Chemosphere • 2021

[object Object], [object Object], [object Object]

Frontiers in Microbiology • 2015

Microbial electrosynthesis, an artificial form of photosynthesis, can efficiently convert carbon dioxide into organic commodities; however, this process has only previously been demonstrated in reactors that have features likely to be a barrier to scale-up. Therefore, the possibility of simplifying reactor design by both eliminating potentiostatic control of the cathode and removing the membrane separating the anode and cathode was investigated with biofilms of Sporomusa ovata. S. ovata reduces carbon dioxide to acetate and acts as the microbial catalyst for plain graphite stick cathodes as the electron donor. In traditional 'H-cell' reactors, where the anode and cathode chambers were separated with a proton-selective membrane, the rates and columbic efficiencies of microbial electrosynthesis remained high when electron delivery at the cathode was powered with a direct current power source rather than with a potentiostat-poised cathode utilized in previous studies. A membrane-less reactor with a direct-current power source with the cathode and anode positioned to avoid oxygen exposure at the cathode, retained high rates of acetate production as well as high columbic and energetic efficiencies. The finding that microbial electrosynthesis is feasible without a membrane separating the anode from the cathode, coupled with a direct current power source supplying the energy for electron delivery, is expected to greatly simplify future reactor design and lower construction costs.

[object Object], [object Object]

Bioresource Technology • 2018

[object Object], [object Object], [object Object] et al.

Current Opinion in Environmental Sustainability • 2020

This paper summarizes key findings from a series of systematic reviews and comprehensive efforts to collate evidence and expert opinions on circular solutions for recovery and reuse of nutrients and carbon from different waste streams in the agriculture and wastewater sectors. We identify established and emerging approaches for transformation towards a more circular nutrient economy with relevance to SDGs 6 and 14. The paper cites the example of the Baltic Sea Region which has experienced decades of fertilizer overuse (1950s–1990s) and concomitant urban sources of excessive nutrients. Regulations and incentive policies combining the nitrogen, phosphorus and carbon cycles are necessary if circular nutrient technologies and practices are to be scaled up. Pricing chemical fertilizer at levels to reflect society’s call for circularity is a central challenge.

[object Object], [object Object], [object Object] et al.

Heliyon • 2024

Microbial fuel cells (MFCs) are promising for generating renewable energy from organic matter and efficient wastewater treatment. Ensuring their practical viability requires meticulous optimization and precise design. Among the critical components of MFCs, the membrane separator plays a pivotal role in segregating the anode and cathode chambers. Recent investigations have shed light on the potential benefits of membrane-less MFCs in enhancing power generation. However, it is crucial to recognize that such configurations can adversely impact the electrocatalytic activity of anode microorganisms due to increased substrate and oxygen penetration, leading to decreased coulombic efficiency. Therefore, when selecting a membrane for MFCs, it is essential to consider key factors such as internal resistance, substrate loss, biofouling, and oxygen diffusion. Addressing these considerations carefully allows researchers to advance the performance and efficiency of MFCs, facilitating their practical application in sustainable energy production and wastewater treatment. Accelerated substrate penetration could also lead to cathode clogging and bacterial inactivation, reducing the MFC's efficiency. Overall, the design and optimization of MFCs, including the selection and use of membranes, are vital for their practical application in renewable energy generation and wastewater treatment. Further research is necessary to overcome the challenges of MFCs without a membrane and to develop improved membrane materials for MFCs. This review article aims to compile comprehensive information about all constituents of the microbial fuel cell, providing practical insights for researchers examining various variables in microbial fuel cell research.

[object Object], [object Object], [object Object] et al.

Journal of Environmental Management • 2021

[object Object], [object Object], [object Object]

Current Opinion in Biotechnology • 2019

[object Object], [object Object], [object Object] et al.

International Journal of Coal Geology • 2016

[object Object], [object Object], [object Object] et al.

Chemical Engineering Journal • 2015

[object Object], [object Object], [object Object] et al.

Environmental Chemistry Letters • 2024

Abstract Anaerobic digestion constitutes a sustainable method for waste management and renewable energy generation, addressing significant environmental and societal challenges. The growing global waste crisis and the increasing momentum toward sustainable energy solutions emphasize the critical need to enhance anaerobic digestion technology for improved efficiency and environmental advantages. This process mitigates waste accumulation, enhances energy security, and reduces greenhouse gas emissions, providing a feasible solution within the framework of a circular bioeconomy. Here, we review the principles of anaerobic digestion and biogas production, focusing on agricultural waste and the utilization of biogas for energy within a sustainable framework. We specifically explore biogas applications in rural and industrial settings, assess the environmental impacts, and discuss the regulatory landscape with insights from China and Europe. This study reveals that the strategic implementation of anaerobic digestion can markedly improve energy yield and sustainability, demonstrating how focused policies and advanced technological practices can optimize biogas utilization. The review enhances comprehension of environmental impacts, emphasizing insights from China and Europe as key examples.

[object Object]

Microbes and Environments • 2015

Extracellular electron transfer (EET) is a type of microbial respiration that enables electron transfer between microbial cells and extracellular solid materials, including naturally-occurring metal compounds and artificial electrodes. Microorganisms harboring EET abilities have received considerable attention for their various biotechnological applications, in addition to their contribution to global energy and material cycles. In this review, current knowledge on microbial EET and its application to diverse biotechnologies, including the bioremediation of toxic metals, recovery of useful metals, biocorrosion, and microbial electrochemical systems (microbial fuel cells and microbial electrosynthesis), were introduced. Two potential biotechnologies based on microbial EET, namely the electrochemical control of microbial metabolism and electrochemical stimulation of microbial symbiotic reactions (electric syntrophy), were also discussed.

[object Object], [object Object], [object Object] et al.

Trends in biotechnology • 2019

[object Object], [object Object], [object Object] et al.

Bioresource Technology • 2021

[object Object], [object Object], [object Object] et al.

Water Research • 2017

[object Object], [object Object], [object Object] et al.

Water Science & Technology • 2015

The microbial fuel cell (MFC) is an innovative technology that was initially designed to harness energy from organic waste using microorganisms. It is striking how many promising applications beyond energy production have been explored in recent decades. In particular, MFC-based biosensors are considered to be the next generation biosensing technology for environmental monitoring. This review describes recent advances in this emerging technology of MFC-based biosensors, with a special emphasis on monitoring of biochemical oxygen demand and toxicity in the environment. The progress confirms that MFC-based biosensors could be used as self-powered portable biosensing devices with great potential in long-term and remote environmental monitoring.

[object Object], [object Object], [object Object] et al.

Applied Energy • 2018

Comparing alternative fuels with po- tential for low-carbon intensities.

[object Object], [object Object], [object Object] et al.

Bioresource Technology • 2020

[object Object], [object Object], [object Object] et al.

ChemSusChem • 2020

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. In this Review, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e. g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

[object Object], [object Object]

Bioresource Technology • 2015

[object Object], [object Object], [object Object]

Behavioural Neurology • 2017

With the increase in the elderly, stroke has become a common disease, often leading to motor dysfunction and even permanent disability. Lower-limb rehabilitation robots can help patients to carry out reasonable and effective training to improve the motor function of paralyzed extremity. In this paper, the developments of lower-limb rehabilitation robots in the past decades are reviewed. Specifically, we provide a classification, a comparison, and a design overview of the driving modes, training paradigm, and control strategy of the lower-limb rehabilitation robots in the reviewed literature. A brief review on the gait detection technology of lower-limb rehabilitation robots is also presented. Finally, we discuss the future directions of the lower-limb rehabilitation robots.

[object Object], [object Object], [object Object] et al.

Frontiers in Materials • 2019

The nonvolatility, structure-tunability and high CO2 uptake capacity render ionic liquids (ILs) the most exciting materials for the carbon dioxide (CO2) capture and fixation to value-added chemicals. The aim of this mini-review is to give a brief idea about the development of the potential ILs for CO2 capture, the mechanism involved in the CO2 binding and the application of ILs in the conversion of CO2 to useful chemicals. The mechanisms and nature of interactions in between IL-CO2 have been discussed in terms of the nature of cation, anion, presence of functional group and the extent of interaction between the components of ILs. The fixation of CO2 to linear and cyclic carbonates and electroreduction of CO2 to carbon-rich fuels in ILs has been accounted in detail. At the end, future challenges in terms of commercializing the ILs for CO2 capture and utilization technology are discussed.

[object Object], [object Object], [object Object] et al.

Frontiers in Microbiology • 2015

Electrodes are unnatural electron acceptors, and it is yet unknown how some Geobacter species evolved to use electrodes as terminal electron acceptors. Analysis of different Geobacter species revealed that they varied in their capacity for current production. Geobacter metallireducens and G. hydrogenophilus generated high current densities (ca. 0.2 mA/cm(2)), comparable to G. sulfurreducens. G. bremensis, G. chapellei, G. humireducens, and G. uraniireducens, produced much lower currents (ca. 0.05 mA/cm(2)) and G. bemidjiensis was previously found to not produce current. There was no correspondence between the effectiveness of current generation and Fe(III) oxide reduction rates. Some high-current-density strains (G. metallireducens and G. hydrogenophilus) reduced Fe(III)-oxides as fast as some low-current-density strains (G. bremensis, G. humireducens, and G. uraniireducens) whereas other low-current-density strains (G. bemidjiensis and G. chapellei) reduced Fe(III) oxide as slowly as G. sulfurreducens, a high-current-density strain. However, there was a correspondence between the ability to produce higher currents and the ability to grow syntrophically. G. hydrogenophilus was found to grow in co-culture with Methanosarcina barkeri, which is capable of direct interspecies electron transfer (DIET), but not with Methanospirillum hungatei capable only of H2 or formate transfer. Conductive granular activated carbon (GAC) stimulated metabolism of the G. hydrogenophilus - M. barkeri co-culture, consistent with electron exchange via DIET. These findings, coupled with the previous finding that G. metallireducens and G. sulfurreducens are also capable of DIET, suggest that evolution to optimize DIET has fortuitously conferred the capability for high-density current production to some Geobacter species.

[object Object], [object Object], [object Object] et al.

Microbial Cell Factories • 2023

A subject of great interest is the bioprospecting of microorganisms and their bioactive byproducts, such as pigments. Microbial pigments have various benefits, including being safe to use due to their natural makeup, having therapeutic effects, and being produced all year round, regardless of the weather or location. Pseudomonas aeruginosa produces phenazine pigments that are crucial for interactions between Pseudomonas species and other living things. Pyocyanin pigment, which is synthesized by 90-95% of P. aeruginosa, has potent antibacterial, antioxidant, and anticancer properties. Herein, we will concentrate on the production and extraction of pyocyanin pigment and its biological use in different areas of biotechnology, engineering, and biology.

[object Object], [object Object], [object Object]

Biotechnology Reports • 2020

Anoxygenic phototrophic bacteria (APB) are a phylogenetically diverse group of organisms that can harness solar energy for their growth and metabolism. These bacteria vary broadly in terms of their metabolism as well as the composition of their photosynthetic apparatus. Unlike oxygenic phototrophic bacteria such as algae and cyanobacteria, APB can use both organic and inorganic electron donors for light-dependent fixation of carbon dioxide without generating oxygen. Their versatile metabolism, ability to adapt in extreme conditions, low maintenance cost and high biomass yield make APB ideal for wastewater treatment, resource recovery and in the production of high value substances. This review highlights the advantages of APB over algae and cyanobacteria, and their applications in photo-bioelectrochemical systems, production of poly-β-hydroxyalkanoates, single-cell protein, biofertilizers and pigments. The ecology of ABP, their distinguishing factors, various physiochemical parameters governing the production of high-value substances and future directions of APB utilization are also discussed.

[object Object], [object Object]

Biosensors • 2015

The provision of safe water and adequate sanitation in developing countries is a must. A range of chemical and biological methods are currently used to ensure the safety of water for consumption. These methods however suffer from high costs, complexity of use and inability to function onsite and in real time. The microbial fuel cell (MFC) technology has great potential for the rapid and simple testing of the quality of water sources. MFCs have the advantages of high simplicity and possibility for onsite and real time monitoring. Depending on the choice of manufacturing materials, this technology can also be highly cost effective. This review covers the state-of-the-art research on MFC sensors for water quality monitoring, and explores enabling factors for their use in developing countries.

[object Object], [object Object]

Applied Microbiology and Biotechnology • 2022

This review provides an update to the last mini-review with the same title pertaining to recent developments in bioleaching and biooxidation published in 2013 (Brierley and Brierley). In the intervening almost 10 years, microbial processes for sulfide minerals have seen increased acceptance and ongoing but also declining commercial application in copper, gold, nickel and cobalt production. These processes have been applied to heap and tank leaching, nowadays termed biomining, but increasing concerns about the social acceptance of mining has also seen the re-emergence of in situ leaching and quest for broader applicability beyond uranium and copper. Besides metal sulfide oxidation, mineral dissolution via reductive microbial activities has seen experimental application to laterite minerals. And as resources decline or costs for their exploitation rise, mine waste rock and tailings have become more attractive to consider as easily accessible resources. As an advantage, they have already been removed from the ground and in some cases contain ore grades exceeding that of those currently being mined. These factors promote concepts of circular economy and efficient use and valorization of waste materials. KEY POINTS: • Bioleaching of copper sulfide ore deposits is producing less copper today • Biooxidation of refractory gold ores is producing more gold than in the past • Available data suggest bioleaching and biooxidation processes reduce carbon emissions.

[object Object], [object Object]

Recycling • 2022

Lithium-ion batteries have become a crucial part of the energy supply chain for transportation (in electric vehicles) and renewable energy storage systems. Recycling is considered one of the most effective ways for recovering the materials for spent LIB streams and circulating the material in the critical supply chain. However, few review articles have been published in the research domain of recycling and the circular economy, with most mainly focusing on either recycling methods or the challenges and opportunities in the circular economy for spent LIBs. This paper reviewed 93 articles (66 original research articles and 27 review articles) identified in the Web of Science core collection database. The study showed that publications in the area are increasing exponentially, with many focusing on recycling and recovery-related issues; policy and regulatory affairs received less attention than recycling. Most of the studies were experiments followed by evaluation and planning (as per the categorization made). Pre-treatment processes were widely discussed, which is a critical part of hydrometallurgy and direct physical recycling (DPR). DPR is a promising recycling technique that requires further attention. Some of the issues that require further consideration include a techno-economic assessment of the recycling process, safe reverse logistics, a global EV assessment revealing material recovery potential, and a lifecycle assessment of experiments processes (both in the hydrometallurgical and pyrometallurgical processes). Furthermore, the application of the circular business model and associated stakeholders’ engagement, clear and definitive policy guidelines, extended producer responsibility implications, and material tracking, and identification deserve further focus. This study presents several future research directions that would be useful for academics and policymakers taking necessary steps such as product design, integrated recycling techniques, intra-industry stakeholder cooperation, business model development, techno-economic analysis, and others towards achieving a circular economy in the LIB value chain.